What does the TPMS light mean on a 2007 Honda Odyssey?

The Tire Pressure Monitoring System (TPMS) light on a 2007 Honda Odyssey indicates that one or more of the vehicle's tires has low air pressure. This is an important warning sign that should not be ignored, as driving with underinflated tires can be dangerous and lead to decreased fuel efficiency, uneven tire wear, and potential blowouts.

Understanding the TPMS Light

The TPMS light on a 2007 Honda Odyssey is part of the vehicle's safety and monitoring system. It is designed to alert the driver when the air pressure in one or more of the tires falls below the recommended level. This is important because properly inflated tires are crucial for the vehicle's handling, stability, and overall safety.

Causes of the TPMS Light

There are several potential reasons why the TPMS light may illuminate on a 2007 Honda Odyssey:

• Low Tire Pressure: One or more of the tires has lost air pressure, either due to a slow leak, puncture, or natural air loss over time.


• Faulty TPMS Sensor: The TPMS sensor, which is responsible for monitoring the tire pressure, may be malfunctioning or have a low battery.


• TPMS System Malfunction: There could be an issue with the TPMS system itself, such as a wiring problem or a problem with the TPMS control module.

It's important to address the underlying cause of the TPMS light as soon as possible to ensure the safety and proper functioning of the vehicle.

Addressing the TPMS Light

If the TPMS light illuminates on your 2007 Honda Odyssey, the first step is to check the tire pressure in all four tires using a reliable tire pressure gauge. If one or more tires are underinflated, inflate them to the recommended pressure level, which can be found in the owner's manual or on a sticker inside the driver's side door jamb.

If the TPMS light remains on after adjusting the tire pressure, there may be an issue with the TPMS system itself. In this case, it's recommended to have the vehicle inspected by a qualified mechanic, who can diagnose and repair any TPMS-related problems.p>

Addressing the TPMS light promptly is important for maintaining the safety and performance of your 2007 Honda Odyssey.

Why is the TPMS light on in my Honda Odyssey?

If the TPMS light is on on a Honda Odyssey, the first step is to check and inflate your tires to the proper pressure, as the light can mean low tire pressure, a dead sensor battery, or a system malfunction. If the light stays on after adjusting the pressure, you must recalibrate the system through the infotainment display or by using steering wheel controls. If the light continues to flash or stays on after recalibration, there may be a faulty sensor, a dead battery, or another system issue requiring professional service.
 
You can watch this video to learn how to reset the tire pressure indicator on a Honda Odyssey: 58sHondaYouTube · Jun 28, 2022
Initial checks and calibration

1. Check tire pressure: Use a tire pressure gauge to check the air pressure in all four tires and compare it to the recommended pressure found on the sticker in the driver's side door jamb. 
2. Inflate tires: Add air to any tires that are low until they reach the correct pressure. 
3. Recalibrate the system: The system will not automatically reset. You need to manually recalibrate it.
   • With a touchscreen: Go to the Home screen on the infotainment system, select Settings, then Vehicle, and finally TPMS Calibration. Choose Calibrate to begin the process. 
   • Without a touchscreen: Park the vehicle and turn the ignition to the "on" position. Use the steering wheel controls to navigate to the Settings menu, then Vehicle, and TPMS Calibration. Select Calibrate to start the process. 
4. Drive to complete recalibration: After starting the calibration, drive the vehicle for a few miles (approximately 20-30 minutes) at a speed between 30 and 65 mph. The light should turn off automatically once the process is complete. 

This video demonstrates how to reset the TPMS light on a Honda Odyssey with a dash button: 1mJoel DufkisYouTube · Oct 24, 2017
Troubleshooting if the light remains on

• Faulty sensor or battery: If the TPMS warning light remains on or flashing, it often means a sensor is faulty or the battery in one of the sensors has died. The sensors last about 7-8 years and need replacement after that time. 
• System malfunction: In some cases, the light may come on due to a software glitch or a hardware malfunction within the TPMS itself. 
• Visit a professional: If the light doesn't go away after following the reset procedure, it is recommended to have the system inspected by a professional. A mechanic can diagnose and replace any faulty sensors or address other system issues. 

What does TPMS mean on a 2007 Honda Odyssey?

Panel. In either case you should stop and check the tires as soon as possible and verify that they are inflated to the proper.

Why is my TPMS light on but tires are fine?

Your TPMS light may be on despite your tires being properly inflated due to a malfunctioning sensor, a dead sensor battery, a recent tire rotation, or extreme weather conditions. A sensor can become damaged from impacts or age, a dead battery can prevent it from sending a signal, and in cold weather, air contracts, which can trigger the warning. A recent tire rotation might also cause a temporary alert that requires a reset. 
This video explains some common reasons why your TPMS light might be on even if your tires appear to be fine: 58sFixITYouTube · Jan 18, 2025
Common reasons for the TPMS light to stay on

• Sensor Malfunction: The sensor itself can be faulty due to age, damage from impacts, or corrosion, causing it to send false readings. 
• Dead Sensor Battery: Each TPMS sensor has a small battery that typically lasts 5 to 10 years before it needs replacement. 
• Weather Changes: Cold temperatures cause air to contract, leading to a drop in tire pressure that can trigger the light even if the tires appear fine. 
• Recent Tire Rotation or Replacement: If the tires were recently rotated or replaced, the system may need a few miles of driving or a manual reset to recognize the new tire positions. 
• Valve Stem Issues: A slow leak from the valve stem can cause the pressure to drop gradually, keeping the light on. 
• Improperly Inflated Spare: If you recently used your spare tire and didn't inflate it, the system may trigger the light. 

You can watch this video to learn how to check your TPMS settings and perform a manual reset: 52sHondaYouTube · May 15, 2019
What to do

1. Check all tires and the spare: Use a tire pressure gauge to check the pressure in all four tires and the spare. Inflate them to the recommended pressure listed on the sticker inside your driver's side door jamb. 
2. Drive for a few minutes: After inflating the tires, drive the vehicle for 10-20 miles to give the system time to recalibrate. Some systems will reset automatically, while others may require a manual reset. 
3. Perform a manual reset: Some vehicles have a "TPMS Reset" button, often located in the glove box or on the dashboard. Pressing and holding this button for a few seconds may resolve the issue. 
4. Seek professional help: If the light remains on, take your vehicle to a professional to diagnose the problem. A mechanic can pinpoint a faulty sensor or a slow leak that is not immediately visible. 

How do you reset the TPMS on a 2007 Honda Odyssey?

To reset the TPMS on a 2007 Honda Odyssey, first, inflate all tires to the manufacturer's recommended pressure, then use the TPMS button or the navigation menu to calibrate the system. If your van has a button, press and hold it until the TPMS light blinks twice. If not, navigate to Settings > Vehicle > TPMS Calibration > Calibrate using the display screen. After initiating the reset, you will need to drive the vehicle for about 30 minutes at speeds between 30 and 60 mph for the calibration to complete.
 
Method 1: Using the TPMS button (for models with the button)
This video demonstrates how to reset the TPMS light using the button: 28sTampa HondaYouTube · Jul 1, 2016

1. Ensure all tires are inflated to the correct pressure, as listed on the sticker inside the driver's side doorjamb. 
2. Turn the ignition to the ON position. 
3. Locate the TPMS reset button, which is usually a small button with the TPMS symbol on it, to the left of the steering column. 
4. Press and hold the button until the TPMS warning light on the instrument panel blinks twice. 
5. The system will begin its calibration process automatically. Drive the vehicle for about 30 minutes at speeds of 30 to 60 mph to complete the recalibration. 

Method 2: Using the navigation/display screen (for models without a button)
This video demonstrates how to reset the TPMS using the display screen: 1mCrazy Honda ChrisYouTube · Nov 4, 2020

1. Inflate all tires to the manufacturer's recommended pressure. 
2. Turn the ignition to the ON position. 
3. Press the MENU button on the display. 
4. Navigate to Settings > Vehicle > TPMS Calibration. 
5. Select Calibrate and then Yes to start the calibration process. 
6. Drive the vehicle for about 30 minutes at speeds between 30 and 60 mph to allow the system to recalibrate. 

If the light remains on

• If the light does not go off after driving, it could indicate a faulty sensor or a problem with the system. 
• Check all tires again, including the spare if applicable, to ensure they are properly inflated. 
• Take the vehicle to a professional shop for a diagnostic check. They can use a scan tool to determine if a sensor needs to be replaced and reprogrammed. 

This video shows how to use a TPMS tool to program sensors: 58sProfessor's GarageYouTube · Aug 24, 2025