What engine is in the 1990 Acura Legend?
The 1990 Acura Legend was powered by a 3.2-liter V6 engine. This engine was a key component of the luxury sedan, providing ample power and performance for drivers. Let's take a closer look at the details of the 1990 Acura Legend's engine.
Engine Specifications
The 1990 Acura Legend was equipped with a 3.2-liter, 24-valve, SOHC V6 engine. This engine produced 160 horsepower and 185 lb-ft of torque. The engine featured an aluminum block and head, which helped to reduce the overall weight of the vehicle.
The engine was paired with either a 4-speed automatic or 5-speed manual transmission, allowing drivers to choose their preferred driving experience. The combination of the powerful V6 engine and the responsive transmission provided the 1990 Acura Legend with a smooth and engaging driving dynamic.
Engine Technology
- The 3.2-liter V6 engine utilized Honda's VTEC (Variable Valve Timing and Lift Electronic Control) technology, which helped to optimize the engine's power and efficiency.
- The engine also featured multi-point fuel injection, which improved fuel delivery and helped to reduce emissions.li>
- Additionally, the engine was designed with a timing belt, rather than a timing chain, which helped to reduce maintenance costs and improve reliability.
The advanced engine technology and design of the 1990 Acura Legend's 3.2-liter V6 engine contributed to the vehicle's reputation for performance, reliability, and overall driving enjoyment.
Is the Acura Legend fast?
Manual-equipped models could accelerate from 0-60 mph (97 km/h) in under 8 seconds and reach a top speed of 135 mph (217 km/h).
How much horsepower does a 1990 Acura Legend have?
160 hp @ 5,900 rpm
What is the top speed of the 1990 Acura Legend?
Manual-equipped models could accelerate from 0-60 mph (97 km/h) in under 8 seconds and reach a top speed of 135 mph (217 km/h). Sedan models had a drag coefficient of 0.32, while coupes were only 0.30.
What engine does an Acura Legend have?
The Acura Legend was manufactured between 1986 and 1995, with motors ranging from 2.5L to 3.2L. This model was the first vehicle produced by Honda to feature a six-cylinder engine.
How much is a 1990 Acura Legend?
The value of a used 1990 Acura Legend ranges from $1,493 to $11,144, based on vehicle condition, mileage, and options. Get a free appraisal here.
Does Honda Legend have VTEC?
The newly designed J35A 3.5-liter V6 was changed from a 90 degree "V", in use since the first 1986 C25A V6 engine, to a 60 degree layout, while VTEC was added to improve efficiency (M-TEC was added by the MUGEN division, called the "M1 package").
What car does a B18B1 come in?
The B18A1 was then updated to a B18B1 that was found in the 1994–2001 Acura Integra RS/LS/GS bodies. The B18B1 became a popular engine swap candidate, often referred as an “LS swap” among Honda enthusiasts.
What engine does the 1990 Integra have?
1.8-liter four-cylinder
Marrying an automatic to this 1.8-liter four-cylinder wasn't an easy trick, because the engine has a late-peaking torque curve that rises to its maximum at 5000 rpm. Low-speed performance is about what you expect of an 1834-cc unit.
What engine is in a Legend?
Yamaha FZ09
The official engine for the Legend Car is the Yamaha FZ09. Following modifications by the U.S. Legend Cars Engine Shop, all engines are sealed and have 135 horsepower before installation in a new build or individually sold. A Legend Car utilizes a spooled rear gear and a six-speed transmission.
How much HP can a B18C1 handle?
“Basically, it's built to make 1,000 horsepower,” says McCreery, who was showing off the car in the Hondata booth at this year's PRI show. “Usually try to make 800 on the dyno and work up from there on the track.
