What is the bolt pattern on a 1952 Chevy truck?
The bolt pattern for most 1952 Chevrolet trucks is 6 on 5.5 inches (6x5.5).
These trucks come from the Advance-Design era (1947–1955), and the common wheel mounting arrangement for 1/2- and 3/4-ton models is a six-lug pattern around a 5.5-inch circle. There are rare exceptions among heavy-duty variants or factory options, so it’s wise to verify your specific vehicle’s pattern before ordering wheels or adapters.
Common pattern details
Variant notes
While 6x5.5 is the baseline for most 1952 Chevrolets, some rare heavy-duty configurations or special factory options may differ. Start with 6x5.5 and confirm with documentation or direct measurement.
Patterns and compatibility notes:
- Most 1952 Advance-Design trucks use 6 on 5.5 inches (6x5.5).
- Heavy-duty variants or rare factory options may deviate; verify with the axle tag or service manual.
- Front and rear axles generally share the same bolt pattern on these trucks, simplifying wheel swaps.
In plain terms, when restoring or modifying a 1952 Chevy truck, you should start with the assumption of a 6x5.5 bolt pattern and confirm with measurement or official documentation before purchasing wheels or adapters.
How to verify your bolt pattern
Here is how to confirm the bolt pattern on your particular truck, step by step:
- Inspect the wheel hub area to count lug studs and identify how many bolts the wheel requires (six is common for 1952 trucks).
- Measure the bolt circle diameter by drawing an imaginary line between two opposite lug holes and measuring the distance; for 6-lug patterns, this should be approximately 5.5 inches.
- Check the axle tag, build sheet, or factory service manual for the official bolt pattern specification.
- Cross-check with aftermarket wheel catalogs or part numbers for 1952 Chevrolet trucks to ensure exact compatibility.
Conclusion: Verifying the bolt pattern avoids ordering wheels that won’t fit. The standard for most 1952 Chevrolets is 6x5.5, but always confirm on your specific vehicle.
Summary
In brief, the typical wheel bolt pattern for a 1952 Chevy truck is 6 on 5.5 inches. While that is the standard for most 1/2- and 3/4-ton Advance-Design trucks, variations exist in rare heavy-duty configurations. Confirm your vehicle’s pattern via measurement, axle tag, or service documentation before purchasing wheels or adapters.
