What is the bolt pattern on a 2006 Honda Pilot?
The bolt pattern is 5x114.3 mm (five lug holes on a circle with a diameter of 114.3 millimeters).
The 2006 Honda Pilot uses a five-lug wheel mounting arrangement with a 114.3 mm bolt circle. This specification is crucial when selecting replacement wheels or aftermarket rims, as mismatches can lead to improper fit, safety concerns, and poor handling. Always verify with your owner's manual or a dealer if you’re unsure.
Official specification
Understanding bolt-pattern basics helps you evaluate wheel compatibility. The key factors to check are how many lugs, the bolt-circle diameter, common lug nut dimensions, and the hub bore you’ll need for a proper fit.
Before listing the core specifications, note that the following items are the ones you’ll commonly encounter when reviewing wheel compatibility.
- Bolt pattern: 5 lug holes
- Bolt circle diameter (BCD): 114.3 mm (4.5 inches)
- Lug nut size and thread pitch: commonly M12 x 1.5 (verify on your vehicle)
- Center bore: verify for your exact vehicle; center bore sizes vary; many Honda SUVs use around 64–66 mm; hub-centric rings may be needed for a precise fit
These specifications determine whether a wheel will mount correctly and align with the vehicle’s suspension and brakes.
How to verify for your vehicle
If you want to be absolutely sure before buying wheels or tires, follow these steps to confirm compatibility on your specific 2006 Pilot.
- Consult the owner’s manual, door-jamb placard, or the manufacturer’s website for official wheel specs for your exact trim.
- Compare your current wheels or the stock wheel sticker to confirm a 5x114.3 pattern and note any variations by trim or package.
- Measure the bolt circle if you’re uncertain: measure the distance between opposite lug holes to confirm approximately 114.3 mm (4.5 inches).
- Check the hub bore and center bore: ensure the wheel’s center bore matches or use hub-centric rings if the bore is larger for a snug, centered fit.
- Verify lug nut size and thread pitch for the replacement wheel or torque requirements per spec sheet; ensure you have the correct hardware.
Following these steps minimizes the risk of improper fitment and helps ensure a safe installation of aftermarket wheels or replacement rims.
Summary
The 2006 Honda Pilot uses a 5-lug bolt pattern with a 114.3 mm bolt circle (5x114.3). When replacing wheels, confirm the lug pattern, center bore, and thread pitch against the specific vehicle trim and year, and consult official documentation or a dealer if you’re unsure.
What cars use the 6x120 bolt pattern?
Vehicles with a 6x120 bolt pattern include many Buick, Cadillac, Chevrolet, and GMC models, such as the Buick Enclave, Cadillac XT5, Chevrolet Colorado, and GMC Acadia. This bolt pattern is also found on some Ford and Saab vehicles.
Buick
- Enclave (2018-2026)
- GL8 ES, LS, PHEV (2024-2026)
- Electra E4, E4 GS (2023-2025)
- Electra E5 (2023-2026)
- Century (2022-2025)
Cadillac
- XT5 (2016-2025)
- XT6 (2019-2025)
- SRX (2010-2017)
- Optiq, Optiq-V (2023-2026)
Chevrolet
Colorado (2015-2023), Traverse (2018-2023), Blazer, and Trailblazer (2021-2023).
GMC
Acadia (2017-2023), Canyon (2015-2023), and Terrain (2017-2023).
What's the bolt pattern on a Honda Pilot?
The Honda Pilot bolt pattern is 5x120mm for most models from 2008 to the present, with the exception of the first generation. The first-generation Pilot, produced from 2003 to 2008, has a 5x114.3mm bolt pattern.
This video explains how to measure the bolt pattern of a wheel: 37sRealTruck.comYouTube · Mar 20, 2017
- 2008 to present: 5x120mm
- This includes the second, third, and fourth generations.
- 2003 to 2008: 5x114.3mm (also written as 5x4.5 inch)
- This applies to the first generation of the Honda Pilot.
What Hondas have a 4x100 bolt pattern?
Compatibility and Suitability: The 4x100 bolt pattern is predominantly found in compact and subcompact Honda models, such as older Civic models, the Fit, CRX, Insight, Del Sol, Prelude, and City.
What is the bolt pattern for a 2006 Honda Pilot?
Honda Pilot 2006-2008 16" OEM Wheel Rim Machined Dark Charcoal This is a 16" OEM Wheel Rim. This wheel has 5 lug holes and a bolt pattern of 114.3mm.
