What is the bolt pattern on a 2007 Ford F150?
The bolt pattern is 6-lug on a 135 mm circle (6x135 mm, about 5.31 inches).
For the 2007 F-150, this 6x135 pattern is the standard fit for most trims and wheel configurations from that model year. The pattern dictates which wheels will mount correctly, and it works in concert with the hub bore and lug nut specifications to ensure proper alignment and secure fit.
Pattern specifics
Key measurements you’ll need when shopping for wheels or replacements are listed below.
- Bolt pattern: 6x135 mm (six lug holes on a 135 mm circle; equivalent to 6 on 5.31 inches).
- Center bore: 87.1 mm (approximately 3.43 inches) to align wheels with the hub.
- Lug nuts: typically M14x1.5 thread with a conical/tapered seat on OEM wheels.
When replacing wheels, ensure you match these basics and consider hub-centric rings if the hub bore differs from the wheel's bore.
Compatibility considerations
While the 6x135 mm pattern is standard for most 2004–2008 F-150 models, some special editions or aftermarket configurations may vary. Always verify compatibility with your specific VIN, trim, and wheel model by consulting the owner’s manual, Ford's official parts, or the wheel manufacturer’s fitment chart.
Summary
The 2007 Ford F-150 uses a 6x135 mm bolt pattern (six lug holes on a 135 mm circle, about 5.31 inches). Additional fit factors include a center bore of about 87.1 mm and typically M14x1.5 lug nuts with a conical seat. Confirm exact specs for your vehicle and wheels before purchasing.
