Loading

How much oil does a 3.6 l Dodge Caravan take?

For a standard oil change on the 3.6 L Pentastar V6 used in the Dodge Grand Caravan, expect to use about 5 quarts (4.7 liters) of engine oil, including the filter. This amount reflects the typical oil capacity you’ll need to fill the engine from a drained state.


The exact amount can vary slightly by model year, filter choice, and whether you are performing a full drain with a new filter or topping up. Always verify the precise quantity and viscosity recommended for your vehicle in the owner's manual and by checking the dipstick as you add oil.


Oil capacity specifics for the 3.6 L Pentastar in the Caravan


Below is a concise guide to the key numbers and practical steps to ensure you fill to the correct level during an oil change.


To help you quickly confirm the right quantity, here are the core facts you should know before you begin:



  • Oil capacity (with filter): about 5 quarts (4.7 L).

  • Recommended viscosity: typically 5W-20 for most climates; 5W-30 may be used in hotter climates or as specified by the owner's manual.

  • Filter change note: Replacing the filter is included in the 5-quart estimate; if you use a different filter, the total amount may vary slightly (roughly +/- 0.5 quart). Always check the level with the dipstick after adding oil.

  • Filling and checking: After draining, add roughly 4.5–5.0 quarts, then run the engine briefly, turn off, wait a minute, and recheck the level with the dipstick to reach the full mark.


In short, having about 5 quarts on hand and verifying with the dipstick ensures you reach the proper level without overfilling.


Notes on model year and maintenance


Engine oil capacity can vary slightly by year and by the filter type used during a change. If you’re unsure, consult the owner’s manual for your exact year and trim, or ask a qualified mechanic to confirm the correct quantity for your vehicle.


Summary


The Dodge Grand Caravan’s 3.6 L Pentastar V6 typically requires about 5 quarts (4.7 liters) of engine oil for a full oil change with a new filter. Use 5W-20 oil in most cases, though 5W-30 can be appropriate in certain climates. Always verify with the dipstick and your manual before you refill.

How much oil does a 2015 Dodge Grand Caravan 3.6 L take?


The 2015 Dodge Grand Caravan with the 3.6L engine has an oil capacity of 5.9 quarts (5.6 liters) when the filter is changed. It is recommended to use SAE 5W-20 motor oil that meets the Chrysler MS-6395 specification. After refilling, always check the oil level with the dipstick to ensure it's correct. 

  • Capacity: 5.9 quarts (5.6 liters) with a filter change.
  • Oil type: SAE 5W-20 motor oil.
  • Specification: Must meet Chrysler MS-6395.
  • Important: Always check the level with the dipstick after adding the oil and before starting the engine.



How many quarts does a 3.6 Dodge Caravan take?


5.5 quarts Initial Fill.



How much oil do you put in a 3.6 L V6?


The oil capacity for a 3.6L V6 engine is typically 5 to 6 quarts, but it varies by vehicle model and year. For a 2020 Dodge Charger, it's around 5.9 quarts, while a 2023 Jeep Wrangler requires 5 quarts. Newer Jeeps, such as the 2016-2021 Grand Cherokee and Durango, often require 6 quarts. Always check your specific owner's manual for the most accurate information, as it can differ even within the same engine family. 

  • 5 quarts: Common in many models like the 2020 Jeep Wrangler and 2025 Ram 1500. 
  • 5.9 quarts: The capacity for some models, such as the 2020 Dodge Charger. 
  • 6 quarts: Required for certain vehicles, including the 2013 JK Jeep Wrangler and some 2016-2021 Grand Cherokee and Durango models. 
  • Check your owner's manual: This is the most reliable source for your specific vehicle's oil capacity. 
  • After refilling: It's important to check the oil level with the dipstick after refilling to ensure it is correct. 



How much oil does a 3.6 liter V6 engine take in a Grand Cherokee?


Engine Oil
Capacity: 5.9 quarts (with filter).


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.