What is the bolt pattern on a 2010 Acura TL?
The 2010 Acura TL uses a 5-lug bolt pattern on a 114.3 mm bolt circle (5x114.3).
This article explains what that means for wheel compatibility, how to verify the specs on your car, and what to check when shopping for aftermarket wheels or replacements.
Bolt pattern and related specs
Before you buy wheels, it helps to know the key specifications that determine compatibility beyond just the bolt pattern.
- Bolt pattern: 5x114.3 (five lug holes arranged on a 114.3 mm bolt circle)
- Center bore: 64.1 mm (the hole in the wheel that fits over the hub; hub-centric rings may be needed for some aftermarket wheels)
- Lug nut size and seat: typically M12x1.5 with a conical (60-degree) seat
These numbers ensure the wheel can be mounted securely and properly centered on the vehicle. When mixing OEM and aftermarket wheels, always confirm both the bolt pattern and the hub bore to avoid clearance or alignment issues.
How to verify bolt pattern on your TL
Use these steps to confirm the exact fit for your specific vehicle and wheel choice, especially if you’re dealing with a used car or aftermarket options.
- Check the owner's manual or the door jamb/sticker for wheel specifications, including bolt pattern, center bore, and lug requirements
- Inspect the factory wheels or hubs to count lug holes and measure the bolt circle diameter
- Consult a reputable dealer or wheel/tire professional with your VIN to confirm compatibility for your exact trim and year
When shopping for wheels, verify that the chosen wheels meet these specs for safe mounting, proper alignment, and optimal performance. If anything is unclear, seek professional guidance before purchasing.
Summary
In short, the 2010 Acura TL uses a 5x114.3 bolt pattern with a 64.1 mm center bore and lug hardware typically specified as M12x1.5 with a conical seat. Verify these specs for any aftermarket wheels and consult a professional if you’re unsure about fitment or hub-centric adapters.
