What is the bolt pattern on a Chrysler 300 5x115?
The bolt pattern is 5x115 mm (five lug holes on a circle with a 115 mm diameter, about 4.53 inches). This is the standard pattern used on the majority of modern Chrysler 300 models.
For anyone shopping for wheels or replacements, this means you should be looking for wheels with a 5x115 bolt circle. Always verify the exact year and trim, as well as center bore and offset, to ensure a proper fit.
Bolt pattern basics
What the numbers mean
The 5x115 designation breaks down into two parts: the number of lug holes (5) and the bolt circle diameter (115 mm). This tells you how many studs the hub has and the diameter of the circle those studs form, which must match the wheel you purchase.
The essential facts are summarized below:
- Bolt pattern: 5 lug holes
- Bolt circle diameter: 115 millimeters (approximately 4.53 inches)
- Common shorthand: 5x115 or 5x4.53"
In practice, matching the 5x115 bolt pattern is the first hurdle for wheel compatibility. From there, other factors like center bore and offset determine the final fit.
Model year coverage and compatibility
Most Chrysler 300s produced from 2005 onward (on the LX platform) use the 5x115 bolt pattern. If you’re swapping wheels or mixing wheels from different vehicles, confirm the exact specification for your year and trim, and verify the center bore and offset to avoid fitment issues.
Key compatibility notes include:
- Applicable to typical 2005–present Chrysler 300 models on the LX platform
- Center bore compatibility: 71.5 mm is common for these vehicles; use hub-centric rings if your new wheels require a different bore
- Wheel offset must be appropriate for your suspension and brake setup to prevent rubbing or clearance problems
Always verify with the vehicle’s manual or official specifications for your exact year and trim, as there can be rare exceptions or regional variations.
How to verify on your own
If you’re unsure about any aspect of wheel compatibility, there are straightforward checks you can perform or have performed by a professional shop.
- Compare wheel specifications to your vehicle’s published wheel data for your exact year/trim
- Measure the lug circle on your hub and confirm it matches 115 mm
- Check center bore compatibility and consider hub rings if needed
- Confirm offset compatibility to avoid clearance issues with brakes, suspension, or fenders
When in doubt, consulting a professional or a reputable wheel/tires retailer can prevent fitment problems and ensure safe installation.
Summary
The Chrysler 300 predominantly uses a 5x115 bolt pattern (five lug holes on a 115 mm circle). This standard applies to most LX-platform models from 2005 onward, but always verify year-specific details, including center bore and offset, before purchasing wheels or adapters.
Will 5x114.3 fit 5x115 bolt pattern?
The best practice is still to make sure that your wheels and bolt patterns match those things are set to the proper. Specifications. Using machines. And using mismatched parts will lead to fitment.
What takes a 5x115 bolt pattern?
Wheels with a 5x115 bolt pattern can be found on a ton of great vehicles, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs and more. Whether you're rocking that classic American muscle or a refined vehicle that boasts high-end luxury, you can amp up your ride's looks with 5x115 wheels.
What's the bolt pattern on a Chrysler 300?
Chrysler 300 Wheel Fitment Overview
All Chrysler 300 model years from 2005 to 2025 use a 5x115mm bolt pattern, which makes finding aftermarket wheels easier, particularly if you're trying to stay close to OEM specifications.
What does the 4x108 bolt pattern fit?
The 4x108 bolt pattern is commonly used by vehicle brands such as Mazda, Ford, Saab, Mercury, Volvo, and many more. Wheel sizes that we carry for this bolt pattern are 15, 16, 17, and 18-inch wheels. Our large selection of wheel finishes, designs, and colors can help you truly customize your vehicle.
