What is the bolt pattern on a Ford Fiesta?
The Ford Fiesta generally uses a 4x108 mm bolt pattern (four bolts on a 108 mm circle) with a center bore of 63.4 mm. This is the standard across most generations and markets, but you should verify the exact spec for your year and trim when selecting wheels or adapters.
Understanding what the bolt pattern means
Bolt pattern, or PCD (pitch circle diameter), is a measure that defines how many lug holes a wheel has and the diameter of the circle those holes form. For the Fiesta, the baseline is four lug holes arranged on a 108 mm circle, which is typically written as 4x108. The center bore is the larger hole in the middle of the wheel that aligns with the hub; a 63.4 mm bore is common for many Fiesta models. Matching these dimensions helps ensure proper seating, balance, and safety when mounting wheels.
Common compatibility details you should know when shopping for wheels or adapters are summarized below.
- Bolt pattern: 4x108 mm (4 on 108 mm circle), often denoted as 4x108 or 4x4.25 in.
- Center bore: 63.4 mm — centers the wheel on the hub.
- Typical wheel offset: around ET 40–ET 52, depending on wheel width and model year.
- Scope: applies to most European and North American Fiesta generations released from the late 1990s through today; rare exceptions are possible with special editions or aftermarket parts.
When shopping for aftermarket wheels or replacements, this alignment is critical. An incorrect fit can lead to vibration, improper centering, or unsafe mounting. If you’re unsure, consult a dealer or a wheel-fitment specialist and provide your VIN to pull the exact spec for your car.
How to verify your Fiesta’s bolt pattern
Follow these steps to confirm the bolt pattern for your specific Fiesta:
- Check the owner's manual or the tire/wheel information placard on the door jamb or fuel filler cap; it often lists the recommended bolt pattern and offset.
- Use your VIN or build sheet from Ford’s official resources or trusted parts catalogs to pull the exact wheel specs for your car.
- Measure the bolt circle directly if needed: measure the distance between opposite lug holes to confirm the 108 mm circle.
- Cross-check with reputable wheel-fitment databases or consult a professional installer before purchasing wheels.
Armed with the correct data, you can shop confidently for wheels and adapters that fit safely and perform as intended.
Summary
In short, the Ford Fiesta’s bolt pattern is normally 4x108 mm with a 63.4 mm center bore, and a typical offset around ET 40 to ET 52. Always verify for your exact vehicle year and market to ensure compatibility. When in doubt, consult official specs or a wheel specialist.
What cars do 4x108 wheels fit?
Cars with a 4x108 bolt pattern include many models from Ford, Volvo, and Peugeot, such as the Ford Escort, Focus, and Fiesta, as well as older Alfa Romeos and Saabs. You can also find this bolt pattern on various vehicles from other manufacturers like Mazda, Mercury, Citroën, and Audi.
Ford
- Escort: Most models
- Focus: Many models
- Fiesta: Many models
- Mustang: Models from 1974-1993
- Tempo: Most models
- Contour: Most models
- Mercury Cougar: Some models
Volvo
- 850: Most models
- XC70: Some models
- Other: Many older and newer models
Peugeot
- 106, 206, 306, 405: Many models
- 308, 3008, 5008: Many models
- Partner, Partner Tepee: Many models
Other makes
- Alfa Romeo: Older models like the GT and Spider
- Audi: Older models like the 80 and 90
- Saab: 900, 9000, and other models
- Mazda: Various models
- Mercury: Various models
- Citroën: Various models
- Abarth: 600e
What is the bolt pattern on a 2010 Ford Fiesta?
Sixth Generation Ford Fiesta (2008 – 2019) Wheel Fitment
Following Ford's Fiesta range, this generation's wheel bolt pattern is similarly 4x108.
What is the lug pattern on a Ford Fiesta?
4x108
Build your Ford Fiesta rim and tire package! What is the Ford Fiesta bolt pattern? Every generation of Ford Fiesta comes with a 4x108 bolt pattern. A popular 4-lug bolt configuration, there's a slew or wheels to choose from in this size.
Will a 5x114.3 fit a 5x108 Ford?
ISC Suspension is proud to supply its brand name wheel adapter at an affordable price. Our Wheel Adapters are made of CNC 6061-T6 lightweight aluminum and include M12*1.5 hardware, grade 10.9. These will allow 5x108 Ford owners to fit 5x114. 3 wheels to their vehicle without needing to change their wheel hubs.
