What is the lug pattern on a 2005 Dodge Dakota?
The lug pattern on a 2005 Dodge Dakota is a 6-lug arrangement on a 5.5-inch bolt circle (139.7 mm).
In plain terms, this means there are six lug studs arranged around a circle 5.5 inches in diameter. This pattern is consistent across most 2004–2005 Dakota models (including both 2WD and 4WD variants). When shopping for wheels, it is the first key specification to match; you’ll also need to consider hub bore size and lug nut seat type to ensure a proper fit.
Bolt pattern specifics
To help you confirm wheel compatibility, consider these key points about the Dakota's lug pattern:
- Pattern: 6-lug on a 5.5-inch bolt circle (6x5.5 inches; 139.7 mm).
- Application: Applies to most 2004–2005 Dakotas, including 2WD and 4WD configurations.
- Fit considerations: For aftermarket wheels, verify center bore and lug nut seat type; hub-centric rings may be needed for perfect alignment.
Always verify with official documentation or a trusted parts retailer, as there can be trim-level or aftermarket variations.
Hub bore and lug seat considerations
Even with a matching 6x5.5" bolt pattern, you must confirm the wheel hub bore and the lug nut seating type. If the hub bore is larger, hub-centric rings may be used to ensure a precise fit. If the wheel uses a different lug nut seat than the factory, you may need to use different lug nuts or adapters.
Verification steps
Use these steps to confirm the lug pattern on your specific vehicle before purchasing wheels:
- Check the door jamb or glove box sticker or the owner's manual for wheel specification; look for "Bolt Pattern: 6x139.7" or "6x5.5 in."
- Measure the bolt circle if you prefer; measure from the center of one lug hole to the center of the opposite lug hole across the wheel face—should be 5.5 inches (139.7 mm).
- Count the number of lug holes on the wheel; there should be six.
- Confirm hub bore size if your wheels are hub-centric; you may need spacers or rings if the bore differs.
- Ensure lug nut seat type matches the wheel’s lug nut seating (most Dodge wheels use a conical seat, but verify).
With these checks complete, you’ll be better positioned to select wheels that fit safely and perform as intended.
Summary
The 2005 Dodge Dakota uses a 6x5.5" bolt pattern (139.7 mm). Always verify center bore and seat type, and consult official specs or a professional if you’re unsure about wheel compatibility.
What is the bolt pattern on a 2005 Dodge Dakota?
The 2005 Dodge Dakota has a bolt pattern of 5x139.7mm, which is also commonly referred to as 5x5.5 inches. This means there are five lug holes with a 139.7mm (5.5-inch) circle diameter.
- Bolt Pattern: 5x139.7mm or 5x5.5 inches
- Number of Lugs: 5
- Stud/Bolt Diameter: 139.7mm (5.5 inches)
What Dodge trucks have a 5X5 5 bolt pattern?
Bolt Pattern Chart
| TRUCK | YEAR | BOLT CIRCLE |
|---|---|---|
| Dodge Ram 1/2-ton Pickup | 06-11 | 5X5.5 |
| Dodge Ram 1/2-ton Pickup | 12-13 | 5X5.5 |
| Dodge Ram 1/2-ton Pickup | 14-18 | 5X5.5 |
| Dodge Ram 1/2-ton Pickup | 19-Current | 5X5.5 or 6X5.5 |
What vehicles use a 6x114.3 lug pattern?
A 6x114.3 bolt pattern, also known as 6x4.5, fits various vehicles, most notably Nissan models like the Frontier, Pathfinder, and X-Terra. It is also found on some Mercedes-Benz (X-Class), Kia (Borrego), Pontiac, Renault, Suzuki, and Ford (Corvair, Mustang) vehicles.
Nissan
Frontier, Pathfinder, X-Terra, NP300 / Navara, and Terra.
Mercedes-Benz
X-Class.
Kia
Borrego and Mohave.
Other vehicles
- Ford: Corvair, Mustang
- Hyundai:
- Mitsubishi: Raider, Montero Sport
- Pontiac: Montana SV6
- Renault: Alaskan
- Saturn: Relay
- Suzuki: Equator
Important note
- Before purchasing wheels, always confirm the correct bolt pattern for your specific vehicle model and year, as some vehicles may use different patterns even within the same manufacturer.
What rims fit my Dodge Dakota?
Most Dodge Dakotas use a 5-lug 4.5-inch (114.3 mm) bolt pattern, and many models are compatible with rim sizes ranging from 15 inches up to 22 inches. To ensure a proper fit, check the specific year and trim of your truck and confirm the bolt pattern and recommended rim sizes, notes BB Wheels and Discounted Wheel Warehouse.
Key specifications
- Bolt Pattern: The most common is 5 x 4.5 inches (or 114.3 mm). Some older or heavier-duty models may have different specifications.
- Rim Diameter: A wide range of diameters are available, from 15 inches up to 22 inches, depending on the model year and desired look.
- Offset: Most Dakotas have a high positive offset, but it's crucial to check the specific requirements for your model year.
How to find the right rims
- Identify your truck's year, make, and model. This is the most important factor for determining the correct specifications.
- Confirm the bolt pattern. Check your current wheels or use a vehicle-specific guide to confirm the bolt pattern is 5 x 4.5 inches (114.3 mm).
- Choose a rim diameter. Decide what size rim you want, keeping in mind that larger rims may require modifications or different tire sizes.
- Look for compatible rims. Search for rims that match your chosen diameter and bolt pattern. Websites like Discounted Wheel Warehouse and RealTruck offer fitment guides that can help.
- Verify offset and other specifications. Before purchasing, confirm that the rim's offset and other measurements will work with your truck's suspension and brake components.
