What is the Subaru fuel line recall?
Subaru has issued recall campaigns targeting fuel lines in certain vehicles to prevent leaks and reduce fire risk. Repairs are performed free of charge by Subaru dealers, and eligibility is determined by the vehicle identification number (VIN).
Understanding the recall
The recall focuses on the fuel line that carries gasoline from the tank to the engine. In some affected vehicles, the line or its connections can develop cracks, corrosion, or loosen, leading to a fuel leak. A leak near hot engine components can create a fire hazard or cause the engine to stall. Subaru will replace the affected portions of the fuel line and inspect related fittings as part of the remedy.
- Cracked or leaking fuel lines in the underbody area, which can allow gasoline to escape.
- Corrosion or deterioration of the fuel line may be accelerated by road salt, moisture, or age.
- Faulty clamps or routing that can loosen and cause a leak over time.
- Need for inspection of nearby components (fuel pump, fittings) for damage or improper fitment.
- Increased risk of fire, or engine stalling due to fuel loss.
Note that the recall applies only to specific model years and VIN ranges designated by Subaru and the NHTSA. Owners should verify whether their vehicle is included using the VIN.
How to check if your Subaru is affected
To determine whether your Subaru is included in the recall, use official VIN-based recall lookups and contact a Subaru dealer. A recall notice from Subaru or the National Highway Traffic Safety Administration also provides model-year and VIN information.
- Locate your 17-character Vehicle Identification Number (VIN) from the lower dashboard or door jamb and confirm it matches recall listings.
- Check the official recall databases by VIN through the NHTSA recall lookup or Subaru’s recall portal (for model year and VIN-specific information).
- Contact a Subaru dealership to confirm eligibility and schedule a free inspection and repair if the VIN is listed.
- If you notice a fuel odor, hear a hissing sound, or see a fuel leak, stop driving and contact your dealer immediately.
Subaru typically mails recall notices to registered owners, but a VIN-based lookup is the fastest way to confirm eligibility, especially if you recently purchased a used Subaru.
What happens during the repair
When a vehicle is confirmed to be affected, Subaru dealers will perform the recall remedy at no cost to the owner. The repair can involve replacing the affected fuel lines, correcting clamps, or adjusting routing to ensure secure, leak-free operation. In some cases, related fuel-system components may be inspected or replaced to ensure the system is sound.
- Replacement of the faulty fuel line segment with updated, corrosion-resistant tubing and fittings.
- Reinforcement or repositioning of clamp hardware and routing to prevent future leaks.
- Inspection of connected components (fuel pump, connectors) for signs of leakage or damage.
- Testing for leaks after the repair, followed by a test drive as needed.
Repairs are designed to be performed by trained technicians. Time to complete varies by model and the extent of the work, but most visits are scheduled to minimize inconvenience for the owner.
Safety guidance for drivers
Until your vehicle is inspected or repaired, adhere to basic fuel-safety practices. If you smell fuel, observe a leak, or notice a wet area under the vehicle, avoid driving and contact Subaru or a dealer for assistance.
- Do not drive a vehicle that shows signs of a fuel leak or strong gasoline odor.
- Park away from structures and ignition sources if a leak is suspected and contact a dealer for instructions.
- Have the vehicle inspected promptly; recall repairs are performed at no charge.
Even if you do not notice symptoms, if your VIN indicates inclusion in the recall, schedule inspection promptly to avoid potential safety risks.
Summary
Subaru’s fuel line recall is a safety measure targeting potential leaks in the fuel-delivery lines of specific vehicles. The remedy—replacement and inspection—is free and performed by authorized dealers after VIN verification. Owners should check their VIN via official recall resources, contact a dealer to schedule inspection, and follow safety guidance if leaks or odors are detected. Staying informed and prompt about repairs reduces fire risk and helps keep Subaru fleets safe on the road.
