What is the tire pressure for an Acura?

There isn't a universal tire pressure value for all Acura models. The correct cold tire pressure depends on your specific model, year, and tire size; you’ll find the exact figure on the door placard or in the owner’s manual. Most Acura models use a number in the low to mid-30 psi range, but please verify for your car.

Where the number comes from

The recommended tire pressure is set by the vehicle’s weight distribution, steering and suspension design, and tire dimensions. It is not the maximum pressure printed on the tire’s sidewall. Using the OEM specification helps optimize handling, fuel economy, tire wear, and overall safety.

How to find your exact tire pressure

Use these steps to locate and verify the tire pressure that is specific to your Acura.

1. Open the driver's door and read the placard on the door jamb, which lists the recommended cold tire pressures for the front and rear tires.


2. Confirm you are looking at the correct values for your tire size and trim, since some models use different specs for different wheel packages.


3. If the placard is faded or missing, consult the owner’s manual or the official Acura website for your exact model/year.


4. Use a reliable tire pressure gauge to measure when the tires are cold (before driving or after the car has been stationary for several hours).


5. Inflate or deflate each tire to the exact recommended pressure; do not inflate to the maximum pressure listed on the tire sidewall.


6. Recheck all four tires and adjust if you routinely carry heavy loads or frequently drive with passengers, as some models specify different pressures under load.

Following these steps ensures you’re using the recommended pressure for your specific Acura and helps protect tire wear, handling, and fuel efficiency.

Common notes and tips

In practice, the official tire pressures for Acura placards typically fall within the low-to-mid 30s psi range, but the exact numbers vary by model and tire size. Always rely on the vehicle’s placard and owner’s manual for accuracy.

• Inflate based on cold readings to avoid inaccuracies caused by heat from driving.


• Avoid using the maximum sidewall pressure as the target operating pressure.


• If you frequently haul heavy loads, check whether your model specifies a higher front or rear pressure under load and adjust accordingly.

If you want a precise pressure value for a particular Acura model and year, share the exact model, year, trim, and tire size and I’ll point you to the official specification from the owner’s manual or placard.

Summary

There is no single tire pressure value for all Acura vehicles. The official number is model- and tire-size-specific, posted on the driver’s door placard and documented in the owner’s manual. Always inflate cold to the recommended pressure and verify the exact figure for your specific vehicle to ensure optimal safety, performance, and tire longevity.

Is 35 PSI for tires too high?

No, 35 PSI is not too high for many vehicles; it's often within the recommended range of 30-35 PSI for passenger cars. The correct tire pressure is specific to your vehicle, so you should always check the recommended PSI on the sticker inside your driver's side doorjamb or in your owner's manual, rather than a generic guideline. Running at the correct pressure ensures optimal handling, safety, and tire life, while overinflating or underinflating can lead to uneven wear and other problems.
 
How to find your vehicle's recommended tire pressure

• Look for the sticker: Find the sticker on the driver's side doorjamb. It will list the recommended "cold" tire pressure (PSI) for your front and rear tires. 
• Check your owner's manual: If you can't find the sticker, look in your vehicle's owner's manual for the correct PSI information. 
• Inflate when cold: Check and adjust your tire pressure when the tires are "cold," meaning the vehicle hasn't been driven for at least a few hours. This is because driving heats up the tires and increases the pressure. 

Why correct tire pressure is important

• Safety and performance: Proper inflation ensures good handling, braking, and overall vehicle control.
• Fuel efficiency: Correctly inflated tires can improve your gas mileage.
• Even tire wear: Maintaining the right pressure helps your tires wear down evenly, extending their lifespan. 

What happens if you overinflate

• Harsh ride: Overinflated tires can lead to a stiffer, bumpier ride. 
• Reduced traction: A smaller contact patch between the tire and the road can decrease grip, especially in wet conditions. 
• Increased risk of blowout: While many modern tires can handle high PSI, overinflation can increase the risk of a blowout, particularly if you hit a pothole. 

What is the normal tire pressure for an Acura?

around 32-35 pounds per square inch
Most Acura vehicles have a recommended tire pressure of around 32-35 pounds per square inch (PSI). For a specific tire pressure number for your Acura vehicle, consult your owner's manual or the sticker that should be on the door frame of the driver's side door.

What is the tire pressure for a 2017 Acura MDX?

–35 pounds per square inch
Most Acura vehicles, which include the Acura MDX tire pressure, have a recommended tire pressure amount of 32–35 pounds per square inch (PSI). If you have trouble finding your recommended Acura MDX tire pressure, locate the sticker on the door frame of the driver's side door.

Should I use 32 or 35 tire pressure?

For most cars, the recommended tire pressure is between 32 and 35 psi, and you should use the pressure listed on the driver's side door jamb or in the owner's manual. The correct pressure can vary by vehicle, and the pressure on the tire's sidewall is a maximum, not the recommended value. Using the correct pressure ensures proper handling, fuel efficiency, and tire life, while using the wrong pressure can cause poor handling, reduced traction, and premature wear.
 
How to find the right pressure

• Check the sticker on the driver's side door jamb. This is the most reliable source for your specific vehicle. 
• Consult your owner's manual for the manufacturer's recommendation. 
• Note that the pressure should be checked when the tires are cold (before driving). 
• Don't use the pressure listed on the tire's sidewall, as this is the maximum pressure the tire can hold, not the recommended pressure for your car. 

Why the correct pressure is important

• Too low: Can lead to poor fuel economy, premature tire wear, and a higher risk of tire failure. 
• Too high: Can cause reduced traction, an uncomfortable ride, and rapid, uneven tire wear. 
• Correct pressure: Optimizes handling, safety, and fuel efficiency, and helps your tires last longer.