What is the torque specs for the brake caliper on a 2013 Dodge Ram 2500?
The recommended torque specification for the brake caliper bolts on a 2013 Dodge Ram 2500 is 85-95 ft-lbs (115-129 Nm). This torque range ensures the brake caliper is securely mounted to the vehicle's suspension, allowing the brakes to function properly and safely.
Detailed Brake Caliper Torque Specifications
The brake caliper on a 2013 Dodge Ram 2500 is a critical component that clamps the brake pads against the rotor, creating the friction needed to slow and stop the vehicle. Proper torque on the caliper mounting bolts is essential to maintain the caliper's position and prevent any movement or loosening during braking.
- Recommended torque specification: 85-95 ft-lbs (115-129 Nm)
- Bolt size: M12 x 1.75
- Number of bolts per caliper: 2
- Tightening pattern: Tighten bolts in a crisscross or star pattern to ensure even distribution of force
- Recheck torque after initial 500 miles (800 km) of driving
It's important to use a torque wrench to ensure the caliper bolts are tightened to the proper specification. Overtightening can damage the caliper mounting points, while undertightening can lead to caliper movement and potential brake failure. Always follow the manufacturer's recommended torque values for safe and reliable brake system performance.
What is the torque spec for brake caliper bolts?
Brake caliper bracket bolts connect the caliper bracket to the spindle or knuckle, never seen one with any kind of sleeve. Usually torqued to 80+ ft lbs, big bolts that usually use a 20+mm or 5/8 or larger socket.
What is the torque specs for the 2009 Dodge Ram 2500 brake caliper?
The torque specifications for the light-duty package are 130 ft/lbs for the front caliper brackets and 120 ft/lbs for the rear caliper brackets. The heavy-duty front brake caliper bracket has a torque specification of 275 ft/lbs.
What is the torque on the brake calipers for a 2014 Dodge Ram?
Tightening Torques
Caliper mounting bracket bolts: 2012 and earlier: 120 Ft-lbs. 2013 and 2014: 142 Ft-lbs.
How much torque for rear brake caliper Ram 2500?
Side Snug it. Up. The torque for this is 20 ft-lb.
What is the torque specs for the rear brake caliper of a 2013 Ram 2500?
The rear caliper bracket for the heavy-duty caliper has a torque specification of 163 ft/lbs for the upper bolt and 190 ft/lbs for the lower bolt. Both versions have a torque specification of 32 ft./lbs. for the guide pins.
What is the torque requirement for bolt tightening?
Recommended bolt torques.
| Size (in) | Torque (lbf ft) | |
|---|---|---|
| SAE Grade 2 | SAE Grade 8 | |
| 1/2 | 37 | 80 |
| 9/16 | 53 | 115 |
| 5/8 | 73 | 159 |
What is the torque spec of a 2017 Dodge Ram?
The 2017 Ram 1500 models get up to 395 horsepower, 420lbs/ft torque, and a 10,640 pound towing capacity.
What is the brake torque?
Brake torque is the amount of force that is applied to the rotors in order to slow them down. If your vehicle does not have a sufficient amount of brake torque, it will not be able to stop as effectively as it otherwise could.
What is the torque specs for the brake calipers on a 2017 RAM 2500?
The heavy-duty front brake caliper bracket has a torque specification of 275 ft./lbs. The rear caliper bracket for the heavy-duty caliper has a torque specification of 163 ft/lbs for the upper bolt and 190 ft/lbs for the lower bolt. Both versions have a torque specification of 32 ft./lbs. for the guide pins.
What is the torque on a 2005 Dodge Ram brake caliper?
On the 2005 Dodge RAM 3500 Truck, 2WD, the caliper slide pin bolts are to be torqued to 24 ft. lbs.
