What is the Toyota 5 lug bolt pattern?
There isn't a single Toyota 5-lug bolt pattern. The most common 5-lug pattern for modern Toyotas is 5 on 114.3 mm (5x114.3), but some models use 5 on 100 mm (5x100) or other variations. Always verify for your exact model and year before buying wheels or adapters.
Common patterns used across Toyota vehicles
Here are the bolt patterns you’re most likely to encounter when dealing with Toyota wheels. The exact center bore and offset can vary by model and production year, so always double-check the specific numbers for your car.
- 5x114.3 mm (5 on 4.5 inches) — The most prevalent Toyota 5-lug pattern. Found on many Camry, Avalon, RAV4, Highlander, Sienna, and related models from the 1990s onward. Typical hub bore is about 60.1 mm, but verify for your exact vehicle.
- 5x100 mm (5 on 4.0 inches) — Present on some older or smaller Toyota models and certain configurations. This pattern is less common than 5x114.3 but does appear across a subset of Toyotas over the years; center bore and offsets vary by model/year.
There are occasional model-specific or regional variations that fall outside these two patterns. When shopping wheels or adapters, always confirm the exact lug count, bolt pattern diameter, and center bore for your vehicle.
Non-standard patterns and model-specific variations
Some Toyota vehicles—especially in certain markets or for niche trims—may use less common 5-lug configurations. These are minority cases and are usually well-documented in the owner’s manual, dealer literature, or wheel compatibility databases. If you’re unsure, treat your vehicle as needing a model/year-specific check rather than assuming a universal pattern.
Conclusion: The safe approach is to identify your precise bolt pattern for your exact Toyota model and year before making wheel purchases or using adapters.
How to confirm your exact bolt pattern
Before you buy wheels or adapters, confirm the bolt pattern for your vehicle using a reliable method. The steps below help avoid fitment issues.
- Check the owner's manual or official specs — The manufacturer’s documentation lists lug pattern and hub bore for each model/year.
- Measure the bolt circle diameter (BCD) — If you don’t have documentation, measure the distance between opposite lug holes to determine the pattern. For a 5-lug wheel, you’re looking for the center-to-center distance of the five holes, typically near 114.3 mm or 100 mm in common Toyota configurations.
- Count lug holes and measure center bore — Confirm there are five lug holes and measure the center bore diameter; the bore must fit your vehicle’s hub or accept a centering ring if needed.
- Consult a wheel professional or verified databases — Tire shops, wheel retailers, and online compatibility tools can confirm the exact spec for your specific model/year.
In short, pairing wheels with the correct bolt pattern is essential for safety and performance. Taking a moment to verify your exact spec saves time and prevents fitment problems.
Summary
There is no single Toyota 5-lug bolt pattern. The most common is 5x114.3 mm, used on many mid-to-late 1990s and newer Toyotas and related Lexus models. Some older or niche Toyota vehicles use 5x100 mm or other variations. Always verify the exact lug count, bolt pattern diameter, and center bore for your specific model and year before purchasing wheels.
