What kind of oil does a 2007 Acura take?
A majority of 2007 Acura models require SAE 5W-20 full synthetic motor oil. This grade is commonly specified for the era’s engines, but the exact oil type can vary by model and climate, so always check your owner's manual or the oil cap on the engine for the precise specification.
Common oil grade for 2007 Acura models
Below are the engines most frequently found in 2007 Acura vehicles and the oil grade they typically require. If your model isn't listed or you drive in extreme temperatures, verify the specification in the manual.
- Acura MDX (2007) — 5W-20 synthetic motor oil
- Acura TL (2007) — 5W-20 synthetic motor oil
- Acura TSX (2007) — 5W-20 synthetic motor oil
These entries reflect common factory recommendations for the 2007 lineup. Some specialty models or climates may call for a different viscosity, such as 5W-30, so confirm before purchasing.
Notes for other 2007 Acura models
If you drive a different 2007 Acura model (for example, RDX or RL variants) or you live in extremely hot or cold conditions, consult the owner's manual or contact a dealer to confirm the exact grade and whether synthetic is required or recommended.
How to confirm the exact grade for your car
Here's how to verify the correct oil viscosity for your 2007 Acura model:
- Check the owner's manual under Engine Oil or Maintenance Schedule for the recommended viscosity.
- Look at the oil fill cap on the engine; it often lists the grade (for example, "SAE 5W-20").
- Check under-hood stickers or labels near the engine bay that may specify the oil type and specification.
- If in doubt, contact a local Acura dealer or service center for confirmation.
Using the precise grade ensures optimal lubrication, fuel economy, and engine longevity. Using a grade not recommended can affect performance and protection.
Synthetic vs conventional oil
For engines from this era, Acura generally recommends synthetic or synthetic-blend oils to meet tolerances and provide consistent protection. While some owners use high-quality conventional oil, full synthetic is often preferred for 2007 Acura engines, especially if you aim for longer service intervals or improved cold-start protection. Always follow the manual’s guidance or your mechanic’s advice.
Summary
In short, the typical oil grade for many 2007 Acuras is SAE 5W-20, usually in full synthetic form. Verify the grade for your exact model and driving conditions by consulting the owner’s manual, checking the engine oil cap, or asking a dealer. When in doubt, use the manufacturer-recommended specification to protect your engine.
What oil does a 2007 Acura take?
If you own a TL between model years 2004-2014, your engine's recommended oil is 5W-20, a fully synthetic oil; if your Acura TL model is even older, from model years 1999-2003, the most versatile and safe oil to use in your engine is 5W-30 synthetic oil.
What kind of oil does a 3.8 L V6 take?
5W-20
What kind of oil does a 2007 Acura RDX take?
STP Full Synthetic Engine Oil 5W-30 5 Quart.
Can I use 5w30 instead of 5W20 in my Acura?
Everywhere else in the world besides the US, depending on climate, Acura/Honda suggests different viscosities in our J32/J35 engines, ranging from 5w20-10w40. These engines were designed to run on 5w30. You aren't going to hurt anything. Especially if you live somewhere hot.
