What kind of oil does a 2007 Chevy Colorado take?
Most 2007 Chevy Colorados use 5W-30 motor oil for gasoline engines, and the Duramax diesel option uses a heavier diesel oil such as 5W-40. Always verify the exact specification in your owner's manual for your engine and climate.
Engine oil requirements by powertrain
Below is a concise guide to the oil choices for the Colorado's powertrains in 2007. Recommendations vary by whether the truck has a gasoline engine or the Duramax diesel.
Gasoline engines
Gasoline-powered Colorados from 2007 typically use 5W-30 motor oil that meets API SM or newer standards. You can use conventional oil or a synthetic blend; synthetic options can offer added protection in extreme temperatures or high-mileage engines. Always confirm the exact specification for your vehicle in the owner's manual.
- Oil type and viscosity: 5W-30 (conventional or synthetic) meeting API SM or newer.
- Change interval: commonly every 3,000–5,000 miles under normal driving; more often under severe conditions.
- Oil grade variations: some climates or dealer recommendations may allow 0W-30 or 5W-40, but 5W-30 is the standard starting point.
Gasoline engines in the 2007 Colorado series generally rely on 5W-30 oil to balance cold-start protection and high-temperature stability. Confirm with the manual or dealer for your exact engine.
Diesel engine (Duramax)
The Duramax diesel option uses a diesel-grade oil, commonly 5W-40, designed for diesel engines and meeting API CJ-4 or equivalent. Use diesel oil specifically rated for diesel engines; do not use gasoline engine oil in a diesel engine. Check the owner's manual for your exact rating and change intervals, as these can vary by model year and emissions setup.
- Oil type and viscosity: 5W-40 diesel oil meeting API CJ-4 or CK-4, or other approved diesel-rated oils per GM spec.
- Change interval: commonly around 7,500 miles or per GM’s schedule; many operators run synthetic for longer drains.
- Special notes: ensure the oil is specifically labeled for diesel engines and compatible with your Duramax setup.
Diesel engines require diesel-rated oil; always verify the exact spec for your Duramax from the manual or GM service information.
Practical tips for selecting oil
Even with the broad guidelines above, you should follow a few practical steps to ensure you choose the correct oil for your 2007 Colorado, especially if climate or usage varies widely.
- Check the owner's manual or the label under the hood for the exact viscosity and API rating recommended for your engine.
- Consider synthetic oil if you drive in extreme temperatures, tow often, or have high-mileage engines; it can offer better wear protection and longer drain intervals.
- Use a matching oil filter and perform regular oil changes at the interval recommended by GM or your mechanic.
Adhering to the manual's guidance helps ensure engine longevity, regardless of fuel type.
Summary
The 2007 Chevy Colorado typically uses 5W-30 motor oil for gasoline engines and a diesel-grade oil such as 5W-40 for the Duramax diesel. Always verify the exact specification for your engine and climate in the owner's manual or with a GM service professional, and follow the recommended change intervals to maintain engine health.
What oil is recommended for Chevy Colorado?
Most Chevy Colorados use 5W-30 full synthetic oil that meets the GM Dexos Gen 2 specifications. Some older models may recommend 0W-30 synthetic oil, and it's essential to confirm the exact requirement for your specific year and engine by checking the owner's manual or the sticker on the driver's side door or under the hood.
- Primary Recommendation: 5W-30 full synthetic oil is the standard for most recent models and is widely available from brands like Pennzoil, Castrol, Mobil 1, and others.
- Older Models: Older versions may recommend 0W-30 synthetic oil, especially in colder climates.
- Specific Requirements: For optimal performance and to maintain warranty, always ensure the oil meets the specific GM Dexos specification for your engine.
- How to be Sure: The most accurate information for your vehicle can be found in your owner's manual or by checking the oil type sticker located on the driver's side door or under the hood.
What kind of oil does a 3.8 L V6 take?
5W-20
Mustang Oil Change Type & Capacity By Year/Engine
| Year / Engine | Mustang Oil Type | Mustang Oil Filter |
|---|---|---|
| 1979-1993 Mustang | ||
| 4.6L V8 (2V & 4V) | 5W-20 | FL820S |
| 3.8L V6 | 5W-20 | FL400 |
| 2005-2009 Mustang |
What kind of oil does a Chevy Colorado 2.8 take?
SAE 5w30
Meets Chevrolet requested SAE 5w30 viscosity requirement for 2.8L Duramax diesel engines.
What type of oil goes in a 2007 Chevy Colorado?
5W-30
Notes: Full Synthetic. 5W-30.
