What kind of oil does a 2007 cobalt take?
The 2007 Chevrolet Cobalt typically requires SAE 5W-30 engine oil, with an approximate capacity of about 4.5 quarts including the filter. You can use conventional or synthetic oil, as long as it meets the appropriate API specifications for that model year.
The following overview covers the two common engine options for the 2007 Cobalt (2.2L Ecotec L61 and 2.4L Ecotec LE5), the recommended oil grade and specifications, and practical tips to ensure you’re using the right oil for your climate and driving conditions. This guidance reflects the era’s standards and how they apply to vehicles today.
Oil grade and specifications
To summarize the grade and specs for the 2007 Cobalt's engines, the guidance below applies across the typical powertrains in that year.
- Recommended oil grade: SAE 5W-30 for both the 2.2L Ecotec L61 and the 2.4L Ecotec LE5. Oils should meet API service SM or newer; Dexos was not a requirement for 2007 models.
- Oil type options: conventional 5W-30 or synthetic 5W-30 that meets API SN or newer specs; both are acceptable if they meet the grade and performance requirements.
- Climatic considerations: use the 5W-30 grade within a wide range of temperatures; consult the owner's manual for any climate-specific notes if you operate in extreme heat or cold.
These points summarize the standard oil guidelines commonly associated with the 2007 Cobalt; for the exact spec for your vehicle, verify with the owner’s manual or a GM dealer using your VIN.
Oil capacity and maintenance considerations
Details on capacity and service when you’re planning changes or top-offs:
- Oil capacity: Approximately 4.5 quarts (with filter); exact capacity can vary slightly by engine (2.2L vs 2.4L) and other factors such as drain plug configuration.
- Oil change interval: Conventional oil is typically changed every 3,000–5,000 miles; synthetic oil can extend to about 5,000–7,500 miles depending on driving conditions and manual guidance.
- Practical tips: Use a high-quality filter (OEM/ACDelco is common for GM vehicles) and verify the dipstick level after an oil change; run the engine briefly to circulate oil and check for leaks before driving.
In short, aim for 5W-30 oil meeting API SM or newer, with an approximate fill around 4.5 quarts and an oil-change interval aligned with your chosen oil type and driving conditions.
Where to verify and additional considerations
For the most precise specification, consult the 2007 Cobalt owner’s manual or contact a GM dealer with your vehicle’s VIN. If you no longer have the manual, trusted automotive databases or GM’s official service information can provide the exact capacity and recommended oil for your particular engine variant.
Summary
The 2007 Chevrolet Cobalt generally uses SAE 5W-30 engine oil, with an approximate capacity of about 4.5 quarts (including filter). Both common engines (2.2L and 2.4L Ecotec) accept conventional or synthetic oils that meet API SM or newer; Dexos is not a requirement for that year. Always verify the exact specification and capacity for your VIN via the owner’s manual or a GM dealer, especially if you operate in extreme conditions or have a modified engine.
