What kind of oil does a 2015 Acura MDX take?
The 2015 Acura MDX uses 0W-20 full-synthetic motor oil for its 3.5-liter V6 engine.
The oil must meet modern automotive standards and the vehicle’s maintenance schedule. Specifically, you should use a 0W-20 synthetic oil that complies with API SN (or newer) and ILSAC GF-5 (or newer). The engine’s oil capacity is about 5.5 quarts with a filter, and changes are typically guided by the Maintenance Minder system, commonly around every 7,500 miles under normal driving, with more frequent changes advised for severe conditions. Always verify exact specs in your owner's manual or with a dealer for your vehicle's configuration and local conditions.
Oil Type and Certification
Key requirements to ensure compatibility and warranty coverage are the oil's viscosity, type, and certification.
- Viscosity: 0W-20
- Type of oil: Full-synthetic motor oil
- Certification: API SN or newer; ILSAC GF-5 or newer
In short, use a 0W-20 full-synthetic oil that meets API SN/ILSAC GF-5 standards, and avoid using conventional oil unless explicitly recommended.
Oil Capacity and Change Interval
Knowing how much to put in and when to change it helps maintain engine health and performance.
- Oil capacity (with filter): About 5.5 quarts (roughly 5.2 liters)
- Change interval: Typically every 7,500 miles under normal driving; severe driving conditions often require sooner changes (e.g., 3,750 miles). The Maintenance Minder in the MDX will indicate the exact service interval for your vehicle.
Always follow the Maintenance Minder prompts and check your owner's manual for climate and driving conditions' impact on intervals.
Practical tips and notes
Additional considerations include verifying the oil grade on the fill cap, using OEM-recommended or reputable brands, and replacing the oil filter with every oil change to maximize filtration and protection.
Summary: For a 2015 Acura MDX, use 0W-20 full-synthetic oil meeting API SN/ILSAC GF-5 standards, about 5.5 quarts with filter, with change intervals guided by the Maintenance Minder (typically around 7,500 miles in normal conditions; sooner under severe driving). Always confirm exact specifications for your vehicle with the owner's manual or a dealer.
Can I use 5w30 instead of 5W20 in my Acura?
Everywhere else in the world besides the US, depending on climate, Acura/Honda suggests different viscosities in our J32/J35 engines, ranging from 5w20-10w40. These engines were designed to run on 5w30. You aren't going to hurt anything. Especially if you live somewhere hot.
Which engine oil is best for an Acura MDX?
What is the recommended Acura MDX oil type? The suggested Acura MDX oil type can vary depending on your specific model. However, most Acura MDX models after the 2011 model year will use 0W-20 oil, while Acura MDX models before 2011 will use 5W-20 oil.
What kind of oil does a 3.8 L V6 take?
5W-20
Mustang Oil Change Type & Capacity By Year/Engine
| Year / Engine | Mustang Oil Type | Mustang Oil Filter |
|---|---|---|
| 1979-1993 Mustang | ||
| 4.6L V8 (2V & 4V) | 5W-20 | FL820S |
| 3.8L V6 | 5W-20 | FL400 |
| 2005-2009 Mustang |
What type of oil does a 2015 Acura MDX use?
A 2015 Acura MDX uses 0W-20 full synthetic motor oil. This specific type of oil is recommended for newer models to provide better engine protection, fuel efficiency, and longer intervals between oil changes. You will need about 5.7 quarts when changing the oil with a filter.
- Viscosity: 0W-20
- Type: Full synthetic
- Capacity: Approximately 5.7 quarts with a filter change
Why full synthetic oil?
- Engine Protection: It provides enhanced wear protection and is more stable at high and low temperatures, helping to prevent sludge and deposits.
- Efficiency: Full synthetic oil is formulated to improve fuel efficiency and help the engine operate smoothly.
- Longer Intervals: It allows for longer oil change intervals compared to conventional oil, typically recommended every 7,500 to 10,000 miles or once a year.
