What kind of oil does a EJ20 take?
The EJ20 typically takes synthetic 5W-30 oil. Exact viscosity depends on the engine variant and the climate, so always confirm with the owner’s manual or Subaru’s official specifications for your specific car.
Oil viscosity and EJ20 variants
Different EJ20 variants may have slightly different viscosity recommendations, but 5W-30 synthetic serves as the common baseline. Here is a practical guide to what you might expect across the EJ20 lineup.
- Non-turbo EJ20 variants (NA) — commonly specified for 5W-30 synthetic oil; in some climates, 0W-30 may be acceptable if approved by Subaru for your model year.
- Turbocharged EJ20G/EJ20K variants — typically use 5W-30 synthetic as a baseline; in very hot climates or under high boost, some markets may recommend 5W-40, but you should verify against your manual.
- General rule — 5W-30 synthetic is the most frequently recommended viscosity across many EJ20 engines; always follow the year- and market-specific guidance in your manual.
In all cases, rely on the exact specification listed for your vehicle’s year, market, and engine code.
Oil standards, capacity, and change intervals
Beyond viscosity, choosing the right oil grade, meeting standards, and knowing the capacity and service interval are essential for EJ20 longevity.
— with synthetic oil, a typical interval is about 7,500 miles (12,000 km) under normal driving conditions; harsher use (short trips, heavy towing, extreme temperatures) may require more frequent changes.
Always verify the precise capacity and recommended interval in your vehicle’s manual, since regional variants can differ.
Practical tips for ensuring EJ20 oil health
Below are actionable steps to help maintain optimal oil performance for the EJ20, with a focus on using the correct oil in your specific car.
- Always confirm your exact oil grade and capacity from the owner’s manual or a Subaru dealer for your model year and market.
- Use a high-quality full-synthetic oil that meets API SN or newer and GF-5 or GF-6 as applicable.
- Replace the oil filter at each oil change and reset any service indicators if equipped.
Adhering to these practices helps protect the EJ20’s flat-four internals and ensures reliable performance across seasons.
Summary
For the EJ20, synthetic 5W-30 is the typical starting point, but the exact viscosity can vary by variant and climate. Always check the specific year, market, and engine code in the owner's manual for the definitive specification. Expect a rough oil capacity of about 4.2–4.5 quarts (including the filter) and a typical change interval around 7,500 miles (12,000 km) with synthetic oil, adjusting for severe driving conditions. Following Subaru’s official guidance ensures compatibility and optimal engine protection.
What kind of oil does a Subaru Impreza 2.0 take?
2013–2023 Subaru Impreza (FB-series 2.0L): 0W-20 full synthetic. For a decade of Impreza models powered by the naturally aspirated FB-series 2.0L, Subaru specifies 0W-20 full synthetic. This grade was factory-fill and remains the design target for these engines.
What kind of oil does a Subaru Legacy ej20 take?
For example, a Subaru Legacy produced between 2013 and 2021 will need 0W-20 synthetic oil. By contrast, any Subaru Legacy produced between 2005 and '10, these models will use synthetic 5W-30. Your engine type can also have an impact. For instance, a Legacy with a 6-cylinder engine might use 5W-30 instead of 0W-20.
What kind of oil does a 2000 Subaru take?
5W-30 Synthetic Motor Oil
**** Refer to your Owners Manual for your vehicles recommended oil type. Recommended especially for turbo-charged engines, Genuine Subaru Certified 5W-30 Synthetic Motor Oil provides superior protection against oil breakdown for cleaner running and long engine life.
How much oil does a 2.0 liter engine take?
A 2.0-liter engine typically takes between 4.4 and 6 quarts (about 4.2 to 5.7 liters) of oil, but the exact amount depends on the specific vehicle and engine model. You should always check your vehicle's owner's manual for the precise capacity, as it is the most accurate source of information for your car.
| Vehicle Example | Estimated Oil Capacity |
|---|---|
| Honda Civic (2.0L non-turbo) | Approximately 4.4 quarts (4.2 liters) |
| Ford F-150 / F-250 (2.0L EcoBoost) | Approximately 5.7 quarts (5.4 liters) |
| Chevy Equinox (2.0L turbocharged) | Approximately 5 to 6 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_ZtUlafeqNJPti-gPlYD6yAQ_113';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
Important tips
- Check your owner's manual: This is the most accurate way to confirm the correct oil capacity for your specific vehicle.
- Account for the oil filter: Most capacity estimates are for a full oil change, which includes replacing the oil filter.
- Don't overfill: After refilling the oil, always check the dipstick to ensure the level is within the recommended range. Overfilling can cause engine damage.
