What oil does Acura Ilx use?
The Acura ILX typically requires 0W-20 synthetic engine oil, as recommended in the owner's manual and by Acura’s service guidance. Always confirm the exact specification for your model year and engine by checking the manual or the under-hood label.
Understanding the manufacturer’s recommendation
Engine oil viscosity and specification are chosen to balance cold-weather starting, wear protection, and fuel efficiency. Acura’s manuals for the ILX consistently point to a 0W-20 synthetic oil that meets current API SN or newer and ILSAC GF-6 standards. This choice is designed to work across the ILX’s common engine variants while delivering reliable lubrication in a wide temperature range.
Engine variants and official guidance
The ILX has used both a 2.0-liter i-VTEC engine and a 2.4-liter i-VTEC engine in different years. In most model years, Acura’s guidance is to use 0W-20 synthetic oil that meets API SN or newer and ILSAC GF-6 standards. This ensures optimum lubrication and fuel efficiency across a wide temperature range.
Before you read the list below, note that the specifics can vary by year and market. Always confirm with your owner’s manual or the vehicle’s oil-cap label.
Approved oil type and specs
Here’s a concise guide to the oil you should use in an ILX. The list summarizes the key points to keep in mind when selecting oil.
- 0W-20 synthetic engine oil is the standard recommendation for most Acura ILX models. It should meet current API SN or newer and ILSAC GF-6 specifications.
- Use Acura- or Honda-approved 0W-20 engine oil (Genuine Honda/Acura oil) if possible to ensure compatibility with the engine’s seals and the vehicle's lubrication system.
- Avoid non-synthetic or oils with viscosities other than 0W-20 unless your owner's manual specifies otherwise.
Concluding note: Always verify the exact spec for your VIN, as there can be year-to-year variations or local requirements. The oil-cap label inside the engine bay is a quick, reliable reference.
Oil-change intervals for ILX
Oil change frequency depends on driving conditions and whether synthetic oil is used. The following guidance summarizes typical intervals used in official recommendations.
- Normal driving: every 7,500 miles (12,000 km) or 12 months, whichever comes first.
- Severe driving conditions (short trips, extreme temps, heavy traffic): every 3,750-5,000 miles (6,000-8,000 km) or every 6 months, whichever comes first.
Again, the vehicle’s maintenance minder and your manual provide the authoritative guidance. If you drive mostly in city traffic or in very hot or cold climates, you may see the shorter interval apply more often.
Practical tips for maintaining oil health
Beyond following the recommended oil type and interval, here are practical steps to ensure your ILX’s engine remains well-lubricated.
- Check the oil level regularly using the dipstick and top up as needed with the correct 0W-20 oil; do not overfill.
- Replace the oil filter with every oil change to maintain filtration efficiency.
- Respect the service reminders and have oil changes performed by qualified technicians when possible, especially for warranty coverage.
Keeping to the recommended oil type and change intervals helps maintain engine performance and longevity.
Summary
In short, Acura ILX models generally require 0W-20 synthetic engine oil, meeting API SN or newer and ILSAC GF-6 standards. Always confirm with the owner's manual or under-hood label for your specific year and engine variant, and adhere to the recommended change intervals to keep the ILX running smoothly.
Appendix: Quick references
For readers who want quick access, refer to your owner’s manual, the oil-cap sticker, or the service bulletin from Acura for the exact specification for your VIN.
What kind of oil does a 2013 Acura ILX take?
The 2013 Acura ILX requires 0W-20 full synthetic motor oil. The exact amount of oil needed depends on the engine size: the 2.0L engine takes 3.9 quarts with a filter, and the 1.5L engine takes 3.8 quarts with a filter. It is recommended to always check the oil level after refilling.
Oil specifications
- Viscosity: 0W-20
- Type: Full synthetic is recommended and often required.
Oil capacity (with filter)
- 2.0L engine: 3.9 quarts
- 1.5L engine: 3.8 quarts
Important note
- Always check the oil level using the dipstick after adding oil to ensure it is at the correct level.
What type of oil for Acura ilx?
Information
| CL | 2003: 5W-20 (S/UFS), topped off with 0W-20 (UFS) |
|---|---|
| ILX | 2013-2020: 0W-20 (UFS) |
| MDX | 2003-2006: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2007-2013: 5W-20 (S/UFS) 2014-2020: 0W-20 (UFS) |
| MDX Sport Hybrid | 2017-2020: 0W-20 (UFS) |
| RDX | 2007-2012: 5W-30 HTO-06 Specification (UFS) 2013-2020: 0W-20 (UFS) |
What kind of oil does a 2015 Acura ILX take?
The 2015 Acura ILX requires 0W-20 full synthetic motor oil. You will need approximately 3.9 quarts for an oil and filter change. Using a full synthetic oil is recommended to ensure proper engine protection, especially against deposits and sludge buildup.
- Oil type: 0W-20 full synthetic
- Capacity: Approximately 3.9 quarts (with filter)
- Recommendation: Use full synthetic oil for maximum engine protection.
Can I use 5w30 instead of 5w20 in my Acura?
Everywhere else in the world besides the US, depending on climate, Acura/Honda suggests different viscosities in our J32/J35 engines, ranging from 5w20-10w40. These engines were designed to run on 5w30. You aren't going to hurt anything. Especially if you live somewhere hot.
