What rims fit RSX?
Rims that fit the RSX share a common four-lug pattern and hub size, but true compatibility depends on details like center bore, offset, and brake clearance. In short, most 4x100 wheels with a 56.5 mm center bore and an offset in the roughly +40 to +50 range will fit the RSX with proper mounting and minor checks.
Key fitment basics
Understanding the fundamental specifications helps you avoid buying wheels that won’t fit or will rub. Below are the core criteria to verify before selecting RSX rims.
The following checklist highlights the core fitment parameters you should verify for RSX wheels:
- Bolt pattern: 4 lug on 100 mm (4x100).
- Center bore: 56.5 mm; use hub-centric rings if the wheel center bore is larger.
- Offset: commonly in the +40 to +50 mm range for RSX setups; significantly lower offsets can cause rubbing with fenders or brake calipers.
- Wheel width and diameter: typical RSX wheels range from 16x6.5 to 17x7 (and up to 18x7.5 for some setups).
- Brake clearance: Type-S brakes are larger; some wheels that clear stock brakes may need checking on the Type-S or with aftermarket calipers.
When these parameters align, you can usually mount aftermarket wheels on the RSX without issue. Always confirm clearance with your specific wheel model and tire combination.
Common sizes that fit the RSX
Wheels come in a variety of diameters and widths, but certain sizes are particularly popular among RSX owners due to balance between ride quality, handling, and clearance. The list below gives typical ranges to consider and notes where caution is advised.
Typical wheel diameter, width, and offset ranges you’ll encounter with RSX-friendly wheels:
- Diameters: 16", 17", and 18" are common; 15" wheels exist but are less common on RSX performance builds.
- Widths: about 6.5" to 8" wide; wider wheels may require careful brake clearance and fender work.
- Offsets: generally ET40 to ET50 (plus or minus depending on the wheel design and brake package); lower offsets may rub, while higher offsets can push the wheel inward and affect handling.
As with any wheel upgrade, verify that the specific wheel model you’re considering clears the brake calipers, struts, and fenders, and that the center bore fits or rings are used if needed.
Year ranges, brakes, and practical tips
The Acura RSX spans 2002–2006 across its base and Type-S variants. Across these years, the bolt pattern remains 4x100, and the hub bore is 56.5 mm, making most compatibility decisions hinge on offset and clearance rather than year-specific changes. If you’re swapping to wheels that are significantly wider or have a notably different offset, you should test fit and, if needed, use spacers (with caution) or consider a wheel with a more conservative offset to maintain steering feel and avoid rubbing.
Practical tips for shopping and mounting
To optimize results, follow these tips when shopping for RSX rims:
- Always verify hub bore and use hub-centric rings if the wheel bore is larger than 56.5 mm.
- Prefer wheels with ET40–ET50 offsets for a safe starting point; if you go outside this range, plan for possible fender work or spacers (and ensure they’re appropriate for daily driving).
- Check brake clearance, especially if choosing wheels designed for larger brakes or different caliper shapes.
- Confirm tire width compatibility with the wheel width to avoid rubbing at full lock or during suspension travel.
With careful measurement and a test fit, RSX owners frequently run 16", 17", or 18" wheels from a wide range of aftermarket brands, provided the key fitment specs are respected and the installation is performed correctly.
Summary
The Acura RSX accepts wheels with a 4x100 bolt pattern and a 56.5 mm center bore. The most reliable fit typically sits in a +40 to +50 offset range, with wheel widths of about 6.5" to 8" and diameters of 16–18 inches. Always verify center bore, brake clearance, and fender clearance for your exact wheel and tire combination, and consider hub-centric rings if needed. By matching these parameters and testing fit, you can achieve a balanced, safe upgrade that maintains proper handling and aesthetics for your RSX.
Is the RSX a rare car?
No, the RSX is not considered a rare car overall, but specific, well-maintained, and unmodified examples, particularly the Type S trim, are becoming harder to find and are increasingly desirable to enthusiasts, making them more "rare" in the collector market. While thousands were produced, many were modified or not maintained, which contributes to the scarcity of clean examples today.
Factors affecting the RSX's current value and "rarity"
- Production numbers: The RSX was never a particularly low-production car, with Acura selling over 30,000 in its best year, notes Hagerty.
- Market saturation: The RSX was popular as a tuner car, meaning many examples were modified or had their powertrains abused, leading to a scarcity of original, unmodified vehicles, according to Reddit users and CarGurus.com.
- Collectible status: Clean, low-mileage, and unmodified examples are increasingly sought after by collectors, which is driving up their value and making them seem rarer in the market.
- Specific trims/colors: Some specific models, like the Type S, are more collectible than the base models. Some factory colors are also rarer than others.
- Future potential: As the market for "analog" sports cars grows, the RSX is gaining more appreciation and is seen as a future classic, further increasing the value and desirability of well-kept examples, says CarBuzz.
What bolt pattern is a RSX?
5x114.3
Your vehicle works well with 17" and 18" wheel diameters, with 17" being the most popular size. All 2002 - 2006 Acura RSX's feature a 5x114. 3 bolt pattern.
What size are RSX type S wheels?
Specifications
| Condition | New |
|---|---|
| Diameter | 17 inch |
| Offset | 45 mm |
| Material | Alloy |
| Center Bore | 64.1 mm |
How to know if rims are compatible?
Put simply, to find if your wheels will fit your car, measure the distance from your wheel's center point to where it is mounted. This is the offset. Add that to half your wheel's width to find the back space and subtract it to find the front space. Compare this to your wheel well to see if it fits.
