What size are the brakes on a Honda CRV?
Brake rotor sizes on a Honda CR-V vary by model year and trim; most models use front rotors in the 11–12 inch range and rear rotors in the 9–10 inch range, with exact numbers listed in your owner's manual or Honda's parts catalog.
This article explains how those sizes can differ across generations, why the numbers aren’t one-size-fits-all, and how you can confirm the exact size for your specific vehicle.
Brake sizes by generation and trim
Brake sizes are influenced by the CR-V’s generation, trim level, and wheel package. The ranges below reflect typical configurations encountered on common CR-V models, but exact specifications should be verified for your exact year, trim, and wheel setup.
- Fifth generation (2017–2022): Front rotors commonly around 11.5–12.0 inches; rear rotors commonly around 9.0–9.5 inches.
- Sixth generation (2023–present): Front rotors commonly around 11.6–12.0 inches; rear rotors commonly around 9.0–9.6 inches.
- Earlier generations (reference): Front rotors typically around 10.5–11.5 inches; rear rotors around 9.0–9.5 inches.
These ranges cover the majority of trims, including those with larger wheels or upgraded brake packages. Always verify the exact size for your vehicle using your VIN or the official Honda parts catalog.
How to confirm the exact size on your CR-V
To determine the precise brake sizes for your specific CR-V, you can use several reliable methods. The steps below help ensure you pull the correct measurements for parts replacement or maintenance.
- Check the owner’s manual or the service manual for your model year and trim; it will list standard brake sizes.
- Inspect the rotor itself for stamped markings that indicate diameter, such as a Ø symbol followed by a number (e.g., Ø320).
- Use Honda’s official parts catalog or a dealer parts department by entering your VIN to pull the exact specification for your vehicle.
- Measure directly if you have access to the vehicle’s rotors: use a caliper or a rigid ruler to measure the outer diameter of the rotor, and compare with the factory spec.
When replacing rotors or pads, ensure the new parts match the exact diameter and thickness specified for your vehicle to preserve braking performance and sensor compatibility.
Summary
There isn’t a single universal brake size for the Honda CR-V. Sizes vary by generation, trim, and wheel package. In general, plan on front rotors around 11–12 inches in diameter and rear rotors around 9–10 inches, but always verify with VIN-based resources or the official service manuals for your year and trim.
