What size are the lug nuts on a 2008 Honda?
Most 2008 Honda models use five lug nuts per wheel with a standard 19 mm hex size for installation and removal. The wheel studs are typically M12 x 1.5, and the lug nuts have a 60-degree conical (tapered) seating. Exact sizing can vary by model, trim, and aftermarket wheels, so verify for your vehicle.
Common lug nut specifications for 2008 Honda models
Below is a quick reference of lug nut characteristics commonly found on 2008 Honda models. The information should be used as a starting point and verified on your vehicle.
- Hex size: 19 mm (most models).
- Thread on studs: M12 x 1.5 (standard for Honda 5-lug hubs).
- Screw seat type: 60-degree conical (tapered) seat for most OEM and many aftermarket wheels.
- Number of lug nuts per wheel: 5.
In summary, for most 2008 Honda models, expect 19 mm lug nuts with M12 x 1.5 thread and a 60-degree conical seat, five nuts per wheel. Always verify for your specific model and wheel setup.
Model-specific notes
2008 Honda Civic
The Civic line from that year generally uses five lug nuts with a 19 mm hex socket, M12 x 1.5 thread on the studs, and a 60-degree conical seat. Some wheel designs or aftermarket options may differ, so check the exact nut type on your wheels.
2008 Honda Accord
Accord models typically share the same lug nut characteristics: five nuts per wheel, 19 mm hex, M12 x 1.5 threads, 60-degree conical seating. Verify if your trim uses any unique wheel hardware.
2008 Honda CR-V
CR-Vs from 2008 usually follow the common spec: five lug nuts per wheel, 19 mm hex, M12 x 1.5 thread, 60-degree conical seat. As with other models, verify if you have special wheel setups.
2008 Honda Fit
Fit models around that year typically use standard five-lug wheels with 19 mm lug nuts. Confirm if you have aftermarket wheels or a different OE spec for a specific trim.
2008 Honda Pilot
Pilot SUVs of the 2008 vintage generally use five lug nuts with 19 mm hex sockets and M12 x 1.5 threads with a 60-degree seat, though wheel alternatives can vary by package and wheel size.
2008 Honda Odyssey
Odyssey minivans from 2008 commonly use the same lug nut arrangement: five per wheel, 19 mm hex, M12 x 1.5, 60-degree conical seat. Check for any unique wheel nuts on specific trims or after-market wheels.
How to verify the exact lug nut size for your 2008 Honda
To confirm the precise lug nut size for your car, follow these steps:
- Consult the owner's manual or the door jamb information sticker for wheel and tire specs.
- Inspect the current lug nuts on your wheels and measure the hex size with a ruler or a lug wrench that fits snugly.
- If uncertain, bring a sample lug nut (or the wheels) to a parts store or a trusted mechanic to match the correct size.
- When replacing wheels, ensure the replacement lug nuts are compatible with your hubs and rims and torque them to the manufacturer’s specification.
Following these steps will help you verify the correct lug nut size for your 2008 Honda and prevent cross-threading or wheel damage.
Summary
In the 2008 Honda lineup, lug nuts are most commonly 19 mm in hex size with M12 x 1.5 thread and a 60-degree conical seat, five per wheel. Verify exact sizing for your specific model and wheel configuration by checking the owner’s manual, door sticker, or measuring the existing hardware. When in doubt, consult a professional to ensure safe mounting and torquing.
What size socket is a Honda lug nut?
What Size Honda Lug Nuts Do I Need?
| Model | Year | Thread/ Socket Size |
|---|---|---|
| Accord | 2003-2020 | 19 mm |
| Civic | 2006-2020 | 19 mm |
| CR-V | 1997-2020 | 19 mm |
| Pilot | 2003-2020 | 21 mm |
What size is a Honda lug nut?
Most modern Honda vehicles use an M12 x 1.5 lug nut size. This means the lug nut has a 12mm diameter and a 1.5mm thread pitch. You should always confirm the specific size for your vehicle, as there can be exceptions like some Civic Type R models.
Standard Honda lug nut size
- Thread size: M12 x 1.5
- Diameter: 12mm
- Thread pitch: 1.5mm
What this means for you
- This size is common for many Honda models, including the Civic, Accord, CR-V, and HR-V, and has been for decades.
- The hex size (the size of the socket needed to turn the nut) is typically 19mm (or 3/4") for standard M12x1.5 lug nuts.
- If you are unsure, always check your owner's manual or a reliable source for your exact year and model.
What size are the lug nuts on a 2008 Honda Accord?
Notes: Nut. 12 mm x 1.50 thread size, 3/4" hex, 1.38" length. Refer to your owner's manual or wheel manufacturer's guide for correct thread size, seat style, length, hex and torque specifications.
What size are the lug nuts on a 2008 Honda Civic?
The 2008 Honda Civic uses M12 x 1.5 lug nuts. This means the lug nuts have a metric thread diameter of 12mm and a pitch of 1.5mm.
- Thread Size: M12 x 1.5
- Thread Diameter: 12mm
- Pitch: 1.5mm
