What size are the lug nuts on a 2013 Honda Pilot?
The lug nuts on a 2013 Honda Pilot are M12 x 1.5 thread with a 19 mm socket; they are typically torqued to about 80 ft-lb (roughly 108 Nm).
Core lug nut specifications to know
For standard factory wheels, these are the key mechanical details you’ll encounter when replacing or servicing lug hardware on this model.
- M12 x 1.5 thread size
- Socket size (lug nut hex): 19 mm
- Seat type: 60-degree conical (acorn) seat
- Number of lug nuts per wheel: five
- Torque specification when tightening: around 80 ft-lb (108 Nm)
These specs apply to typical factory equipment. If you have aftermarket wheels or lug nuts, verify that the thread pitch, seat type, and torque setting match the new hardware to prevent damage or improper seating.
How to verify the exact specs for your vehicle
Always double-check on your specific car. Look at the owner's manual, the tire and loading information sticker on the driver's door jamb, or contact a Honda dealer with your VIN to confirm exact lug nut details for your trim and wheel package.
Summary
In short, for most 2013 Honda Pilot models, expect M12 x 1.5 lug nuts with a 19 mm hex, five per wheel, 60-degree conical seat, and a tightening torque near 80 ft-lb. Always confirm against your vehicle’s documentation and any aftermarket hardware.
What size lug nuts are on a 2013 Honda Pilot?
A-Premium M14-1.50 Wheel Lug Nuts Compatible with Honda Odyssey Pilot 2011-2021 Passport Ridgeline Acura MDX TL RLX ZDX Front and Rear 20-PC Set.
What size socket for Honda Pilot lug nuts?
14 mm x 1.50 thread size, 3/4" and 13/16" hex. 4-pack, acorn lock, socket key.
What vehicles have 9 16 18 lug nuts?
9/16-18 lug nuts fit a range of Ford, Dodge, Ram, and Chevrolet/GMC vehicles, particularly older models and many of the heavier-duty trucks and SUVs from the late 1980s through the 2010s. They are also compatible with most aftermarket wheels that use a 9/16-18 thread pitch and a 60-degree conical seat. It's essential to confirm the correct thread pitch and seat type for your specific vehicle and wheels to ensure a proper and safe fit.
Compatible vehicles
- Ford: 1988-1998 F250, F350
- Dodge: 1994-2010 Ram 2500, 3500; 2002-2010 Ram 1500; 2004-2009 Durango; 2005-2011 Dakota
- Ram: 2013-2018 Chassis Cab; 2011-2011 Ram 1500, 2500, 3500
- Chevrolet/GMC: Many C20, K20, C30, K30, and related suburban models from the 1970s to the 1980s
- Hummer: 1992-2006 H1
- Chrysler: 2006-2009 Aspen
Important considerations
- Aftermarket vs. OEM: Some lug nuts are designed for aftermarket wheels, while others are direct replacements for original equipment manufacturer (OEM) wheels. Make sure the lug nuts match the type of wheels you have.
- Thread pitch: The "9/16-18" specifies the size and thread count. The "9/16" refers to the stud diameter, and the "18" is the number of threads per inch. You must match this to your vehicle's studs.
- Seat type: The seat type (e.g., conical, spherical) must match your wheel to ensure proper contact and secure mounting.
- Confirm fitment: Always verify the exact fitment for your specific year, make, and model before purchasing.
What size socket goes on a lug nut?
The most common socket sizes for lug nuts are 19mm or 21mm, but sizes can vary by vehicle. A 13/16-inch socket is often the correct imperial size, as it's very close to 21mm. To ensure the correct fit, check your vehicle's manual, or bring a lug nut to a hardware or auto parts store to get the right size socket. A 1/2-inch drive socket wrench is recommended for its torque capacity.
Common lug nut socket sizes
- Metric: 19mm, 21mm (most common), 17mm, 22mm
- Standard: 13/16 inch (often fits 21mm lug nuts)
How to find the right socket size
- Check your owner's manual: This is the most reliable way to confirm the correct size for your specific vehicle.
- Measure or bring a lug nut: If you don't have your manual, take one of the lug nuts to a hardware or auto parts store to find the correct socket size.
- Use a socket set: Consider getting a set of sockets specifically designed for lug nuts, which often includes both common metric and imperial sizes, like those from TEKTON Hand Tools.
Tips for removing and installing lug nuts
- Use a 6-point socket: A 6-point socket is less likely to round off the corners of the lug nut compared to a 12-point socket.
- Use a deep-wall socket: Deep-wall sockets are designed to fit over the lug nut and are often necessary when the nut is recessed within the wheel.
- Choose the right drive size: A 1/2-inch drive is recommended for lug nuts because it can handle the higher torque often required for tightening them properly.
- Use a torque wrench: Always use a torque wrench to tighten lug nuts to the manufacturer's specifications to ensure proper and safe installation.
