What size are the lug nuts on a 2018 Honda CRV?
Short answer: The 2018 Honda CR-V uses lug nuts with a 12 mm straight-threaded stud (M12 x 1.5) and a 19 mm hex head for installation and removal; the typical torque specification is about 80 ft-lbs (108 Nm). These specifications cover most stock wheels on LX, EX, EX-L, and Touring models, but always confirm with the owner’s manual or dealer if aftermarket wheels are involved.
Lug nut size and thread specification
Knowing the exact lug nut size helps you select the right tools and avoid cross-threading or improper seating. Here are the core specs for the 2018 CR-V:
- M12 x 1.5 thread size
- 12 mm stud diameter
- Lug nut seat: conical (60-degree)
- Socket size: 19 mm (3/4 inch) for lug nuts
Practical implications for maintenance
With the correct nut size, you can use the proper socket and torque wrench for tire rotations, winter-wheel installs, or upgrade to aftermarket wheels that maintain the CR-V’s bolt pattern and seating type.
Concluding the list: These specifications apply to stock wheels and common aftermarket wheels that fit Honda’s lug pattern and seat type.
Torque specifications and installation tips
Proper torque ensures safe wheel attachment and even clamping force. The following guidelines apply to most 2018 CR-V wheel assemblies:
- Recommended torque: 80 ft-lbs (108 Nm)
- Tightening pattern: star or crisscross sequence to seat the wheel evenly
- Re-torque: recheck after 50–100 miles of driving
- Surface prep: ensure hub surface, lug nuts, and threads are clean; avoid lubricants on the threads unless specified by Honda
Best practices during wheel service
Always use a properly calibrated torque wrench, follow the star pattern, and recheck torque after the initial miles. If you switch to aftermarket lug nuts, verify the seat type and thread specs with the wheel manufacturer and Honda guidance.
Concluding the list: Following these steps helps ensure wheel security and prevents issues such as loose wheels or uneven braking rotor wear.
Check for variations and official sources
While these specifications cover the majority of 2018 CR-V configurations, wheel setups can vary by trim level and aftermarket parts. Always consult the owner's manual, service manual, or a Honda dealer for your exact vehicle, especially if you plan to use aftermarket wheels or lug nuts.
Summary
For a 2018 Honda CR-V, expect M12 x 1.5 lug studs with 19 mm lug nuts and a typical installation torque around 80 ft-lbs (108 Nm). Use a star-pattern tightening sequence, recheck torque after 50–100 miles, and verify specs with official manuals or a dealer if you have non-stock wheels.
Can I use 7/8 socket for 22mm?
Yes, you can use a 7/8" socket for a 22mm bolt or nut because they are the same size, with a very small difference that is negligible in practice. 22mm is equal to approximately 0.8660.8660.866 inches, and 7/87 / 87/8 inch is equal to 0.8750.8750.875 inches.
- Size conversion: The two sizes are effectively interchangeable, as they are the closest imperial and metric equivalents.
- Fit: A 7/87 / 87/8" socket will fit on a 22mm bolt. It may feel a little loose, but it will still work.
- Impact tools: This combination is commonly used for impact tools, like those for lug nuts, where sockets are often stamped with both sizes.
- Warning: It's important to use a socket with the correct number of points (e.g., 6-point or 12-point) to avoid damaging the bolt or nut, especially on older or rounded-off fasteners.
What size socket is a Honda CRV lug nut?
The Honda CR-V lug nut socket size is 19mm. This is the standard size for most Honda CR-V models, which use M12 x 1.5 thread lug nuts. Using the correct 19mm socket is crucial to avoid damaging the lug nuts.
This video shows how to remove the lug nuts on a Honda CR-V: 1mFord Boss Me - Auto / Politics / Family YouTube · Oct 10, 2024
- Socket size: 19mm
- Thread size: M12 x 1.5
- Importance of the correct size: Using the correct 19mm socket prevents damage to the lug nuts and is recommended for proper tightening and loosening.
- Recommendation: It is best to use a 6-point socket to ensure a good grip and reduce the risk of rounding off the lug nuts.
What size lugs are on a 2018 CR-V?
12 mm x 1.50 thread size, 3/4" hex, 31.75 mm length. Refer to your owner's manual or wheel manufacturer's guide for correct thread size, seat style, length, hex and torque specifications.
What vehicles have 9 16 18 lug nuts?
9/16-18 lug nuts fit a range of Ford, Dodge, Ram, and Chevrolet/GMC vehicles, particularly older models and many of the heavier-duty trucks and SUVs from the late 1980s through the 2010s. They are also compatible with most aftermarket wheels that use a 9/16-18 thread pitch and a 60-degree conical seat. It's essential to confirm the correct thread pitch and seat type for your specific vehicle and wheels to ensure a proper and safe fit.
Compatible vehicles
- Ford: 1988-1998 F250, F350
- Dodge: 1994-2010 Ram 2500, 3500; 2002-2010 Ram 1500; 2004-2009 Durango; 2005-2011 Dakota
- Ram: 2013-2018 Chassis Cab; 2011-2011 Ram 1500, 2500, 3500
- Chevrolet/GMC: Many C20, K20, C30, K30, and related suburban models from the 1970s to the 1980s
- Hummer: 1992-2006 H1
- Chrysler: 2006-2009 Aspen
Important considerations
- Aftermarket vs. OEM: Some lug nuts are designed for aftermarket wheels, while others are direct replacements for original equipment manufacturer (OEM) wheels. Make sure the lug nuts match the type of wheels you have.
- Thread pitch: The "9/16-18" specifies the size and thread count. The "9/16" refers to the stud diameter, and the "18" is the number of threads per inch. You must match this to your vehicle's studs.
- Seat type: The seat type (e.g., conical, spherical) must match your wheel to ensure proper contact and secure mounting.
- Confirm fitment: Always verify the exact fitment for your specific year, make, and model before purchasing.
