What size are the lug nuts on a 2024 RAV4?
For a 2024 Toyota RAV4, the lug nuts are typically M12 x 1.5 with a 21 mm hex size, using a conical (tapered) seat, on a 5x114.3 mm bolt pattern, tightened to about 103 Nm (76 ft-lb). Always verify with your owner’s manual or dealer for your exact wheel setup, especially if aftermarket wheels are involved.
The RAV4 line largely follows Toyota’s standard lug hardware, but trim levels and optional wheels can influence the specific parts. The following details outline the standard factory configuration most drivers will encounter.
Key lug nut specifications
Below is a concise reference for the primary measurements and compatibility considerations.
- M12 x 1.5 thread size (stud diameter and pitch)
- 21 mm lug nut hex size
- Conical (tapered) seat
- Bolt pattern: 5 × 114.3 mm
Note: If you replace wheels or use aftermarket parts, confirm that your lug nuts match the wheel studs and seat type to ensure proper engagement and safety.
Torque and installation considerations
Proper torquing is essential for wheel retention. The standard torque for most stock RAV4 wheels is approximately 103 Nm (76 ft-lb). Use a calibrated torque wrench and follow a criss-cross tightening pattern to ensure even seating.
When changing lug nuts or wheels, confirm the thread pitch and seat style match your studs and hub. If in doubt, consult the vehicle’s manual or a Toyota-certified technician.
Summary
Short version: The 2024 RAV4’s lug nuts are typically M12 x 1.5 with a 21 mm hex head, conical seat, on a 5x114.3 bolt pattern, tightened to about 103 Nm (76 ft-lb). Always verify with your specific vehicle and any aftermarket wheels.
