What size socket for Honda Accord lug nuts?
The standard lug nut size for a Honda Accord is 17mm. This size is used across most Honda Accord models, regardless of the year or trim level. To properly remove and replace the lug nuts on your Honda Accord, you will need a 17mm socket or wrench.
Detailed Explanation
The Honda Accord is a popular midsize sedan that has been in production since the 1970s. Over the years, Honda has maintained consistency in the lug nut size used on the Accord, making it easy for owners to know the right tool to have on hand for tire changes or wheel rotations.
The 17mm size is a common lug nut specification found on many Japanese and some European vehicles. It provides a secure fit for the wheel and allows for proper torque to be applied when tightening the lug nuts.
Tips for Changing Honda Accord Lug Nuts
- Always use a 17mm socket or wrench when removing or tightening the lug nuts on your Honda Accord.
- Make sure the socket or wrench fits snugly over the lug nut to avoid stripping the nut.
- Loosen the lug nuts before jacking up the vehicle, then fully remove them once the wheel is off the ground.
- When reinstalling the wheel, hand-tighten the lug nuts first, then use a torque wrench to tighten them to the recommended specification, usually around 80-100 ft-lbs of torque.
- Double-check the lug nut tightness after driving a short distance to ensure the wheel is securely attached.
Following these tips will help ensure a safe and successful tire change or wheel rotation on your Honda Accord.
What size are the lug nuts on a Honda?
The lug nut size used on most Honda models is 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Some larger Honda trucks and SUVs may use 14×1.5 lug nuts instead. And a few older Honda models use the less common 12×1.25 size.
What size socket for Honda Accord?
In this case, a 19mm socket is the right tool for the job. Using the correct socket size ensures a proper fit and prevents damage to both the lug nuts and the wheel studs.
What size socket is a 2008 Honda Accord lug nut?
The hex size of your Honda Accord lug nuts is 19mm (3/4″), so you would need a 19mm socket to fit. Whether you use a lug wrench, torque wrench, impact socket, or regular socket, you'll need the correct size to remove or tighten Honda Accord lug nuts.
What size lugnuts are on a Honda Accord?
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.22″ Length, Chrome (Sold by each)
What size socket to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are the nuts on a Honda Accord?
The thread size of Honda Accord lug nuts is M12x1.
For a new Honda Accord model, there are 20 pcs lug nuts to fasten the wheels. The bolt pattern is 5×114.3, so each wheel has 5 pcs lug nuts.
What size is the drain bolt on a Honda Accord?
2016 Honda Accord Bolt Plug, 14Mm.
What size are the lug nuts on a 2016 Honda Accord?
M12 x 1.5. 3/4 Hex.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
