What size are the wheel threads on a Honda CRV?
Wheel threads refer to the lug-nut and wheel-stud sizing that secures the wheel to the vehicle. For the Honda CR‑V, the most common specification across generations is a metric lug-nut thread of M12 x 1.5 on a 5x114.3 mm bolt pattern, with a 60-degree conical seat. Exact specs can vary by year and trim, so it’s wise to verify for your specific model.
The lug-nut thread size most CR‑V owners will encounter is M12 x 1.5, paired with a 60-degree conical seat on a 5x114.3 bolt pattern. This configuration is standard across the majority of CR‑V generations, though there can be year-to-year variations or aftermarket changes.
Key specs that cover most CR‑V wheels
The following items summarize the typical lug-nut and wheel-stud specifications you are likely to encounter on a CR‑V. Use this as a quick reference, but always confirm against your exact year and model.
- Bolt pattern: 5 on 114.3 mm (5x114.3).
- Lug-nut thread size: M12 x 1.5.
- Seat type: 60-degree conical (often called conical or acorn seat).
- Wheel studs: Typically M12 diameter with a 1.5 mm pitch; match lug nuts to this thread.
Note: Some aftermarket wheels or unusual trim packages may use different seat types or require adapters. Always verify compatibility with your specific wheels and hub.
How to verify for your specific year/model
To confirm your exact lug-nut and thread specs, follow these steps:
- Check the owner's manual or the tire/wheel specification section for the official lug-nut size and seat type.
- Inspect an installed wheel: measure the nut size with a thread gauge or compare with a known M12x1.5 lug nut.
- Measure the wheel studs (if possible) to confirm the diameter and pitch match M12x1.5.
- Confirm the bolt pattern by counting lug holes and measuring the spacing (CR‑V typically uses 5x114.3 mm).
- If uncertain, contact a Honda dealer or reference OEM wheel-nut part numbers to ensure correct fitment.
By performing these checks, you’ll confirm you’re using the correct lug nuts and avoid cross-threading or seating issues when changing wheels.
Generation notes
First generation (1997–2001)
Wheel specs generally aligned with the standard CR‑V configuration: 5x114.3 bolt pattern, M12x1.5 lug nuts, 60-degree conical seats. Always verify for any trim-specific differences.
Second generation (2002–2006)
Standard specs remained 5x114.3 bolt pattern and M12x1.5 lug nuts with a 60° conical seat. Check the exact wheel package if you have an aftermarket setup.
Third generation (2007–2011)
Continued adherence to the common CR‑V lug-nut sizing: M12x1.5 thread, 60° conical seat, on a 5x114.3 pattern. Confirm with OEM data for any special trims.
Fourth generation (2012–2016)
Typical configuration stayed consistent: 5x114.3 bolt pattern and M12x1.5 lug nuts with a 60° conical seat. Always verify if wheels are factory replacements or aftermarket.
Fifth generation (2017–2023)
Widely standardized to the same lug-nut size and bolt pattern, though some trims or aftermarket wheels may alter seating or use different adapters. Verify before mounting.
Sixth generation (2023–present)
Current models generally follow the same standard: 5x114.3 bolt pattern, M12x1.5 lug nuts, 60° conical seat. If you’ve added new wheels, check compatibility with the hub and seat type.
Summary
In most Honda CR‑V models, the wheel threads are M12 x 1.5 with a 60-degree conical seat on a 5x114.3 bolt pattern. While this covers the vast majority of years and trims, verify your exact configuration via the owner's manual, dealer parts information, or by measuring your current lug nuts and studs to ensure proper fitment, especially when using aftermarket wheels or adapters.
What size socket for 2013 Honda CRV lug nuts?
The correct lug nut socket size for a 2013 Honda CR-V is 19mm. You will need a 19mm socket to properly remove and install the lug nuts on this vehicle.
- Hex Size: 19mm
- Thread Size: M12 x 1.5
- Recommendation: Use a 6-point socket to avoid rounding the lug nuts.
What size are lug nuts on a Honda CRV?
The standard Honda CR-V lug nut size is M12 x 1.50mm for the thread size. This typically corresponds to a 19mm socket for removal or installation. However, it is always best to check your owner's manual for the most accurate information for your specific model and year, as aftermarket wheels or specific trims may use different sizes.
- Thread size: M12 x 1.50mm
- Socket size: 19mm
- Seat type: Cone or ball seat for most factory wheels
- Confirmation: Always double-check your owner's manual for the specific model and year of your CR-V, as some exceptions or variations may exist.
Can I use 7/8 socket for 22mm?
Yes, you can use a 7/8" socket for a 22mm bolt or nut because they are the same size, with a very small difference that is negligible in practice. 22mm is equal to approximately 0.8660.8660.866 inches, and 7/87 / 87/8 inch is equal to 0.8750.8750.875 inches.
- Size conversion: The two sizes are effectively interchangeable, as they are the closest imperial and metric equivalents.
- Fit: A 7/87 / 87/8" socket will fit on a 22mm bolt. It may feel a little loose, but it will still work.
- Impact tools: This combination is commonly used for impact tools, like those for lug nuts, where sockets are often stamped with both sizes.
- Warning: It's important to use a socket with the correct number of points (e.g., 6-point or 12-point) to avoid damaging the bolt or nut, especially on older or rounded-off fasteners.
What size socket for Honda lug nuts?
What Size Honda Lug Nuts Do I Need?
| Model | Year | Thread/ Socket Size |
|---|---|---|
| Accord | 2003-2020 | 19 mm |
| Civic | 2006-2020 | 19 mm |
| CR-V | 1997-2020 | 19 mm |
| Pilot | 2003-2020 | 21 mm |
