What size hitch does a F-350 have?
The Ford F-350 Super Duty typically uses a 2-inch receiver hitch as standard, a sizing that covers most towing needs. While 2 inches is the norm for most recent model years, exact compatibility can vary by year, trim, and any factory or dealer-installed towing packages.
Hitch size in practice
Understanding the receiver size helps you pick the right hitch accessories, from ball mounts to gooseneck adapters. The size you need depends on your trailer and towing setup, as well as any upgrades or options your truck might have received.
What you’ll typically find on most F-350s
Most recent Ford F-350 Super Duty pickups leave the factory with a 2-inch square hitch receiver. This standard opening is compatible with a wide range of hitch accessories and supports the vehicle’s typical Class III/IV towing capabilities, depending on the exact configuration.
Common hitch receiver sizes you may encounter:
- 2-inch square hitch receiver — the standard size on the majority of F-350 models; supports a broad range of towing accessories and payloads within the vehicle’s rated capacity.
- 2-1/2-inch square hitch receiver — occasionally available through certain dealer-installed packages or aftermarket upgrades; not the typical factory option for most standard F-350 builds.
- Other sizes (context) — some light-duty vehicles use smaller openings, but these are not standard on the F-350; if you encounter adapters or non-standard equipment, verify compatibility with the trailer and the truck’s towing rating.
Concluding paragraph: If your F-350 has a non-standard setup, verify the receiver size on the hitch itself or through official documentation, and ensure any accessories match both the receiver and the vehicle’s towing rating.
How to verify your specific F-350 hitch size
Because Ford has offered multiple configurations over the years, the most reliable method is to check the vehicle’s documentation or inspect the hitch itself. Look for stamps or labels indicating the receiver size and class rating, or contact a Ford dealer with the VIN for precise specifications.
- Inspect the hitch opening for a stamped size (for example, “2 x 2 in”).
- Measure the receiver opening with a tape measure to confirm width (2 inches or 2-1/2 inches are common for factory or aftermarket hitches).
- Consult the owner's manual or a Ford dealer to confirm the exact towing package and maximum rating for your specific VIN.
Concluding paragraph: Once you confirm the receiver size, pair it with compatible hitch accessories and ensure your trailer load stays within the vehicle’s towing limits for safe operation.
Hitching beyond the receiver: heavy-duty towing options
For certain heavy trailers, some owners use gooseneck or fifth-wheel setups, which do not rely on the standard receiver hitch. These arrangements require different mounting hardware and bed configurations, and may involve additional capacity and certification considerations. Always verify whether your F-350’s towing package supports these options and conform to all safety guidelines.
Concluding paragraph: If you plan to tow very heavy loads or use specialized equipment, consult Ford documentation or a professional installer to ensure the correct hitch configuration and mounting method for your truck.
Summary
In most cases, the F-350’s factory hitch opening is a 2-inch receiver, suitable for a wide range of towing tasks. Always confirm the exact size and rating for your specific vehicle configuration, especially if you have a dealer-installed option or aftermarket upgrade. With the right receiver and accessories, you can tow safely and compliantly within Ford’s guidelines.
What size hitch pin is a F-350?
2 to 2.50-Inch Receiver Hitch 5/8-Inch Hitch Pin.
What trucks have a 2.5 inch receiver?
What Type of Vehicles Utilize a 2.5” Receiver Hitch?
- Ford F-250, F-350, F-450 Super Duty.
- Chevy Silverado 2500, 3500.
- Ram 2500, 3500.
What size hitch is on a Ford F350?
An F-350 hitch size varies by model year and configuration, but typically comes with a 2.5-inch or 3-inch receiver. Newer F-350s, especially those with high-capacity or diesel engines, often have a 3-inch hitch receiver. You may also find a 2-inch receiver, particularly on older or base models or for Class 4 hitches. It is essential to measure the hitch opening to confirm the correct size before purchasing an accessory.
Common F-350 hitch sizes
- 3-inch: Most common on newer and higher-capacity models, especially diesel trucks. This size is often associated with a 21,000 lb. gross vehicle weight rating without needing a weight distribution hitch.
- 2.5-inch: Found on some models and is a common standard for Class 5 heavy-duty hitches.
- 2-inch: Can be found on older models or on specific Class 4 hitches.
How to determine your hitch size
- Measure the opening: On a level surface, measure the width of the opening of the receiver tube to determine if it's 2", 2.5", or 3".
- Check your vehicle's specifications: Consult your owner's manual or the vehicle's trim and engine information to see what size hitch was originally equipped.
- Verify the hitch itself: Some aftermarket or upgraded hitches may be installed. Always check the specifications of the hitch you have to ensure compatibility with your new accessory.
What truck has a 3 inch receiver?
A 3-inch receiver is typically found on heavy-duty trucks, primarily the Ford Super Duty line (F-350 and up, and some F-250s) manufactured from 2017 onwards. It can also be found on some commercial trucks, RVs, and other heavy-duty vehicles with extremely high towing capacities.
Trucks with a 3-inch receiver
- Ford Super Duty: The Ford F-350 and up models from 2017 onwards frequently have a 3-inch receiver. Some F-250 models, particularly those with a heavy-duty towing package, may also be equipped with a 3-inch receiver.
- Commercial and heavy-duty vehicles: Larger commercial trucks, Class A diesel pushers, and Super C RVs on Peterbilt chassis can also have a 3-inch receiver.
Important considerations
- Measure to confirm: Since vehicle configurations can vary, always measure your receiver opening to be certain of its size before purchasing a hitch.
- Reducer sleeves: Many trucks with a 3-inch receiver, especially the F-250 and F-350, come with reducer sleeves that allow you to use 2.5-inch or 2-inch hitches. However, be aware that using reducer sleeves can cause slop and rattling, say BulletProof Hitches and etrailer.com.
- Towing capacity: Your truck's overall towing capacity is limited by the lowest-rated component in the entire towing system, which includes the tow vehicle, the hitch, the ball mount, and the trailer, notes Weigh Safe.
