What size is the axle nut on a 2010 GMC Sierra?
The axle nut size on a 2010 GMC Sierra is 1-1/2 inches or 38 millimeters. This nut secures the wheel hub and bearing assembly to the vehicle's axle, allowing the wheels to rotate freely.
Detailed Explanation
The 2010 GMC Sierra is a full-size pickup truck that was part of the third generation of the Sierra model line. Like other trucks in its class, the Sierra uses large axle nuts to hold the wheel assembly in place.
The specific size of the axle nut on a 2010 GMC Sierra is 1-1/2 inches or 38 millimeters. This is a common size for many full-size trucks and SUVs, as it needs to be large enough to withstand the torque and weight of the vehicle's components.
Importance of Proper Axle Nut Size
Using the correct axle nut size is crucial for the safe operation of a vehicle. If the nut is too small, it may not be able to properly secure the wheel hub and bearing assembly, potentially leading to the wheel coming loose while driving. Conversely, a nut that is too large may not fit properly, also compromising the wheel's attachment.
Proper torque specification is also important when tightening the axle nut. Overtightening can damage the components, while undertightening can allow the nut to loosen over time. Consulting the vehicle's service manual or a professional mechanic is recommended to ensure the axle nut is installed correctly.
Replacing the Axle Nut
- Locate the axle nut, typically found at the end of the axle shaft behind the wheel.
- Use the appropriate size socket or wrench to loosen and remove the nut.
- Inspect the axle shaft and bearing assembly for any wear or damage, and replace if necessary.
- Install the new axle nut and tighten it to the specified torque setting.
- Reattach the wheel and double-check that the nut is properly secured.
Replacing the axle nut on a 2010 GMC Sierra is a straightforward task, but it's important to use the correct size nut and follow the proper installation procedures to ensure the wheel assembly is securely attached and safe to drive.
Do you need a torque wrench for axle nut?
Avoid Overtightening – Use the Right Tool
MOOG recommends using a torque wrench to tighten the axle nut accurately. DO NOT use an impact wrench.
What size is the axle nut on a 2010 Chevy Silverado?
If you are referring to the large nut that holds the drive axle in the center of the hub, we use a 36mm deep impact socket to remove it.
What size socket to remove axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size is the axle nut?
36mm Axle Nut Socket - services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket - services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket - services many GM mid-size vehicles. 29mm Axle Nut Socket - services late model GM, Ford and Asian imports.
What size socket is a wheel nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size is the hub nut on a 2014 GMC Sierra 1500?
The older trucks, and 1500s are 36mm.
