What size is the bed of a 1950 Dodge truck?
Most 1950 Dodge half-ton pickups used an eight-foot bed (96 inches).
In 1950, Dodge offered several wheelbases and cab configurations, so bed lengths could vary by model. This article explains the typical bed sizes for the era and how to confirm the exact measurement on a specific vehicle.
Bed sizes in Dodge's 1950 lineup
Because Dodge produced multiple chassis options in 1950, bed length depended on the wheelbase and body style. The following represents the common baseline figures and notes where variations occurred.
- Standard 1/2-ton bed: about 8 feet long (96 inches).
- Short-bed configurations: some combinations with shorter wheelbases could yield beds shorter than 8 feet (roughly 6.5–7.5 feet).
- Long-bed or specialty chassis: on certain long-wheelbase variants, longer beds were possible but less common.
To verify the exact bed size for a particular 1950 Dodge truck, measure from the inner edge of the tailgate to the inside face of the bulkhead with the tailgate closed. If available, consult factory literature, the VIN/body code, or a Dodge heritage resource for the precise chassis specification.
Practical validation for collectors
For restoration or purchase decisions, corroborate measurements with contemporary Dodge advertising, brochures, or club records. These sources can confirm whether a specific vehicle followed the standard 8-foot bed or had deviations based on its wheelbase.
Summary: The typical bed length for a 1950 Dodge half-ton truck is eight feet, with potential variations tied to wheelbase and body configuration. Always measure or verify against period documentation for a given vehicle.
