What size is the drain plug on a Honda Civic?
When it comes to performing routine maintenance on your Honda Civic, such as an oil change, knowing the correct size of the drain plug is essential. The drain plug is a small but crucial component that allows you to drain the old oil from your engine before adding fresh oil. In this article, we’ll discuss the typical size of the drain plug on a Honda Civic and provide some tips for handling it during maintenance.
Understanding the Drain Plug Size
The size of the drain plug on a Honda Civic can vary slightly depending on the model year and engine type. However, for most Honda Civics, the drain plug typically requires a 17mm socket or wrench to remove. This size is standard across many Honda models, making it a reliable choice for DIY oil changes.
It’s always a good idea to double-check your vehicle’s owner’s manual or consult a trusted mechanic to confirm the exact size for your specific model and year. Using the wrong size tool can strip the plug or damage the threads, leading to costly repairs.
Tips for Handling the Drain Plug
Here are some tips to ensure a smooth and hassle-free experience when working with your Honda Civic’s drain plug:
- Use the Right Tools: Always use a properly sized 17mm socket or wrench to avoid damaging the plug.
- Inspect the Washer: The drain plug typically has a crush washer that helps create a tight seal. Replace the washer during every oil change to prevent leaks.
- Don’t Over-Tighten: When reinstalling the drain plug, tighten it to the manufacturer’s recommended torque specification (usually around 29 ft-lbs for most Honda Civics). Over-tightening can strip the threads or damage the oil pan.
- Work Safely: Always ensure the car is securely lifted and supported with jack stands before working underneath it.
When to Seek Professional Help
If you’re unsure about handling the drain plug or performing an oil change yourself, it’s always best to consult a professional mechanic. At Kevin’s Autos, we specialize in routine maintenance and repairs for all makes and models, including Honda Civics. Our experienced team can ensure your oil change is done correctly and efficiently, saving you time and hassle.
Feel free to contact us or visit our shop for expert advice and service. Proper maintenance is key to keeping your vehicle running smoothly for years to come!
Frequently Asked Questions
What size socket is a Honda Civic plug?
5/8 socket
5/8 socket head. Replacement spark plugs.
What size is the oil plug on a 2010 Honda Civic?
Locate the 17 mm hex oil drain plug at the back of the oil pan, facing the rear of the car. Honda made everyone's life a little easier, and stamped the words "Engine Oil" on the oil pan with an arrow pointing to the drain plug. Position an oil drain pan under the oil pan so that it will collect the draining oil.
What size is a 14mm spark plug socket?
Size: 14mm Bi-Hex (12pt) x 3/8"D x 65mm long. Outside diameter: 17.88mm; inside depth: 61.7mm. Thin walled socket for use on modern engines with limited plug clearance.
What size is the Honda Civic oil drain plug?
Notes: Engine Oil Drain Plug. M14-1.5" Thread Size. Original type valve. Optional Adapter May Be Required.
Are all Honda drain plugs the same size?
14 mm. It is the same as on all the Hondas and Acuras.
What size is the oil drain plug washer on a Honda?
For the engine oil, it's a “14mm aluminum flat crush washer.” I have a pile of them that measure ID 14.5mm, OD 22mm, height 1.8mm. OD of 20-24mm should be fine, and height of 1.2-2.5mm should be fine.
What size socket do I need to remove a drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
How much oil does a 1.5 T Civic take?
Capacity: 3.7 quarts (with filter). After refill check oil level.
What size socket is my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size socket for Honda drain plug?
Oil drain pan opening is a 14mm diameter opening. Oil drain plug is an M14, this takes thread count and "pitch" (the "aggressiveness" of the the angle of the threads) into account. The "head" of the oil drain plug is 17mm. So to remove/install the engine oil drain plug, you will need a 17mm socket or wrench.
