What size is the drain plug on a Subaru?
The drain plug size on a Subaru vehicle is typically 17mm. This standard size is used across most Subaru models, making it easy to find the right replacement part when needed. Whether you're performing an oil change or addressing a leak, understanding the correct drain plug size is crucial for maintaining your Subaru's health and performance.
Understanding the Drain Plug
The drain plug is a crucial component in the oil change process for any vehicle, including Subarus. This small but essential part is responsible for allowing the old oil to be drained from the engine, enabling the fresh oil to be added. The size of the drain plug is an important consideration, as using the wrong size can lead to leaks, stripped threads, or even damage to the oil pan.
Subaru Drain Plug Size
As mentioned, the standard drain plug size for most Subaru models is 17mm. This size is consistent across a wide range of Subaru vehicles, including the Impreza, Outback, Forester, and Legacy, among others. 1 2
It's important to note that while 17mm is the most common drain plug size for Subarus, there may be some exceptions or variations depending on the specific model year and engine configuration. Always refer to your owner's manual or consult with a Subaru-certified mechanic to ensure you have the correct drain plug size for your vehicle.
Replacing the Drain Plug
When it's time to replace the drain plug, it's crucial to use the correct size to ensure a proper seal and prevent any leaks. Here are the steps to replace the drain plug on a Subaru:
- Locate the drain plug, typically located at the bottom of the oil pan.
- Use a 17mm socket or wrench to loosen and remove the old drain plug.
- Clean the threads on the oil pan to remove any debris or old sealant.
- Apply a small amount of thread sealant or Teflon tape to the new drain plug's threads.
- Carefully thread the new 17mm drain plug into the oil pan and tighten it securely.
- Check for any leaks and ensure the plug is properly sealed.
Following these steps will help ensure a successful drain plug replacement and prevent any future oil leaks or issues.
Conclusion
The standard drain plug size for Subaru vehicles is 17mm, making it a straightforward replacement process. By understanding the correct size and following proper installation procedures, you can maintain your Subaru's oil system and keep your vehicle running smoothly for years to come.
What kind of wrench do I need to remove an oil drain plug?
You need a socket wrench to open the oil drain plug so the used oil can drain from the engine.
What size is Subaru oil drain plug?
16X17
Plug 16X17. Confirm, Contact.
What size is a plug socket?
Spark plug sockets are used to lighten and loosen spark plugs, helping you change them without damaging the plug or any wiring. Spark plug sockets come in various sizes, ranging from 9/16 inches to 7/8 inches. The most common spark plug socket sizes are 5/8 inches and 13/16 inches.
What size is the oil drain plug on a 2016 Subaru Outback?
Plug 16X17 - 807016210 - Genuine Subaru Part.
What size is a Subaru oil drain plug?
16X17
Plug 16X17. Confirm, Contact.
What size socket is my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size wrench for Subaru Outback oil drain plug?
Make sure you get the the box wrench or socket - it's a 17 mm or 11/16" size.
What size socket for Subaru Forester oil drain plug?
typically 18-24 for a drain plug bolt.
What size is the oil drain plug on a 2017 Subaru Forester?
Plug 16X17. Engine Oil Drain Plug.
What size is a Subaru drain plug?
Plug 16X17. Confirm, Contact.
