What size is the oil drain plug on a 2007 Dodge Ram 1500?
The oil drain plug size on a 2007 Dodge Ram 1500 is typically 3/4 inch or 19 millimeters. This is a standard size for many Dodge and Chrysler vehicles of that era, making it easy to find replacement plugs.
Detailed Information on the Oil Drain Plug
The oil drain plug is an important component on any vehicle, as it allows you to easily drain the engine oil for routine maintenance and oil changes. On the 2007 Dodge Ram 1500, the drain plug is located at the bottom of the oil pan, which is accessible from underneath the vehicle.
The size of the drain plug is crucial, as it needs to be the right diameter to properly seal the oil pan and prevent leaks. Using the wrong size plug could result in oil leaks, which can lead to engine damage if left unchecked.
Replacing the Oil Drain Plug
- When replacing the oil drain plug, it's important to use the correct size to ensure a proper seal.
- The 2007 Dodge Ram 1500 typically uses a 3/4 inch or 19 mm drain plug.
- Make sure to use a plug made of the same material as the original, usually steel or aluminum.
- Tighten the plug to the proper torque specification, usually around 25-30 ft-lbs.
- Check for any leaks after the first few miles of driving to ensure a proper seal.
Following these guidelines will help ensure a successful oil change and prevent any issues with the oil drain plug on your 2007 Dodge Ram 1500.
How many quarts of oil does a 5.7 hemi take?
6.9 quarts
The engine oil fill capacity for Ram 1500 5.7L Hemi is 6.6 liters or 6.9 quarts.
What size socket to remove drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
What size is the oil drain plug on a 5.7 Hemi?
The factory drain plug has a 13mm head on it.
Where is the drain plug on a Dodge RAM 1500?
Brake pull the hood release handle and open the hood open your oil filler cap this will facilitate the flow of oil when draining you can then remove the skid plate if present to access the drain plug
What size hole do you need to fit a plug?
You'll usually need to use a drill bit which is the same diameter as the wall plug you've chosen, and a screw that's a millimetre or two smaller.
What kind of oil does a 2007 Dodge Ram 1500 5.7 Hemi take?
SAE 5W-20
The RAM 1500 with the 5.7L V8 HEMI engine requires SAE 5W-20 full synthetic oil. Using synthetic oil means you can schedule oil changes for every 10,000 miles.
What size socket for oil drain plug ram 1500?
The thread size of the oil drain plug on a RAM1500 is M14x1. 5mm.
What size oil plug do I need?
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size socket wrench do I need to change my oil?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size is the oil drain plug on a 2005 Dodge Ram 1500?
The size of the drain plug is a 13mm. If you don't have metric tools a 1/2" wrench or socket will work but it will fit a little tight.
