What size is the oil drain plug on a 2013 Ford Escape?
The oil drain plug size on a 2013 Ford Escape is 17mm. This is the standard size used for the oil drain plug on this model year of the Ford Escape SUV.
Detailed Information on the 2013 Ford Escape Oil Drain Plug
The 2013 Ford Escape is a compact SUV that was produced as part of the third generation of the Escape model line. Like most vehicles, the Escape requires periodic oil changes to maintain the engine's health and performance. To drain the old oil, the vehicle has an oil drain plug located at the bottom of the oil pan.
According to the Ford Escape owner's manual and various automotive repair resources, the size of the oil drain plug on the 2013 Escape is 17mm. This is a common size for many vehicles, as it allows for the use of standard 17mm wrenches or sockets to remove and tighten the plug during oil changes.
Importance of Proper Oil Drain Plug Size
Using the correct oil drain plug size is important for a few key reasons:
- Proper Fit: A 17mm plug will fit snugly into the 17mm threaded hole in the oil pan, ensuring a secure seal and preventing leaks.
- Ease of Access: The 17mm size is a common standard, making it easy to find the right tools to remove and replace the plug during an oil change.
- Avoiding Damage: Using the wrong size plug could strip the threads in the oil pan, leading to costly repairs.
Knowing the correct oil drain plug size for your vehicle is an important piece of information to have on hand when performing routine maintenance like oil changes. Following the manufacturer's specifications helps ensure the job is done properly and safely.
What size is the oil drain plug on a 2013 Ford Focus?
M12 x 1.75
Notes: Engine Oil Drain Plug. M12 x 1.75 thread.
What size socket to remove drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
What size is a Ford oil drain plug?
Engine Oil Drain Plug Pan - M12 X 1.75 | FordUS.
What size is the drain plug on a 2013 Ford Escape?
Notes: Engine Oil Drain Plug. Original type valve. M12-1.75" Thread Size. Optional Adapter May Be Required.
How many quarts of oil does a 2013 Ford Escape need?
5.7 quarts
Capacity: 5.7 quarts (with filter). After refill check oil level.
What size is a drain outlet?
Residential Drain Pipe Sizes
| Fixture | Common Drain Pipe Diameter |
|---|---|
| Sinks | 1 1/4 to 2 inches |
| Toilets | 3 to 4 inches |
| Bathtubs | 1 1/2 to 2 inches |
| Showers | 2 inches |
Where is the drain plug on a 2013 Ford Escape?
Out. And drain the oil on the drain plug you want to take the seal. Off just use a. Pick take that off get a new seal take the new seal. Slide it over the drain plug.
What size hole do you need to fit a plug?
You'll usually need to use a drill bit which is the same diameter as the wall plug you've chosen, and a screw that's a millimetre or two smaller.
What size is the oil drain bolt on a Ford Escape?
Dorman – Standard Engine Oil Drain Plug: M12x1. 75 Thread, 15 mm Head, 1 Pack (Part No. 090-175CD)
What size is the drain plug on a 2013 Ford Explorer?
Notes: Engine Oil Drain Plug. M12 x 1.75 thread.
