What size is the oil pan bolt on a 2019 Subaru Outback?
The oil pan bolt size on a 2019 Subaru Outback is typically 12mm. This is a common size for many Subaru models, as it is used to secure the oil pan to the engine block.
Detailed Information on the Oil Pan Bolt Size
The 2019 Subaru Outback uses a 12mm oil pan bolt, which is a standard size for this vehicle. The oil pan is an important component that holds the engine oil and needs to be securely fastened to the engine block to prevent leaks. The 12mm bolt size ensures a tight fit and proper sealing of the oil pan.
It's important to use the correct size bolt when servicing or replacing the oil pan on a 2019 Subaru Outback. Using the wrong size bolt could lead to oil leaks, engine damage, and other issues. Always refer to the manufacturer's specifications or a repair manual when working on your vehicle's oil system.
Tips for Changing the Oil Pan Bolt
- Ensure you have the correct 12mm oil pan bolt before starting the job.
- Thoroughly clean the oil pan and engine block surfaces to remove any old sealant or debris.
- Apply a small amount of thread locker to the bolt threads to prevent them from loosening over time.
- Tighten the bolts to the manufacturer's specified torque, usually around 30-40 Nm (22-30 ft-lbs).
- Double-check that all bolts are properly tightened and there are no signs of leaks.
Following these tips will help ensure a successful oil pan bolt replacement on your 2019 Subaru Outback and prevent any future issues with oil leaks or engine damage.
What is equivalent to a 14mm wrench?
Wrench Size Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/8" | 14mm | 9/16" |
| 7/16" | 16mm | 5/8" |
| 1/2" | 19mm | 3/4" |
| 9/16" | 21mm | 13/16" |
What size bolt is on the oil drain pan?
17mm socket or wrench.
How tight do I tighten my oil pan bolt?
In grab my quarter inch wrench inch. And of course inch. And a quarter. And always remember Lefty Loosey Roddy tighty don't want that thing to come out. All right yeah get me another wrench owner.
What size socket for Subaru drain plug?
Make sure you get the the box wrench or socket - it's a 17 mm or 11/16" size.
What size socket wrench for oil change?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What size wrench do I need for the oil pan?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
What size is the oil drain plug on a 2019 Subaru Outback?
Dorman Engine Oil Drain Plug 65221
Head size (SAE/metric): 17 mm.
Can I put 5w30 instead of 0w20 Subaru Outback?
Oil Type & Capacity for Subaru Outback
Like the Crosstrek, the oil for the Subaru Outback needs to be an API classification SN or ILSAC GF-5. Also like the Crosstrek, the Outback engine should be filled with 0W-20 synthetic oil. If synthetic oil isn't available, you can use either 5W-30 or 5W-40 conventional oil.
How many quarts of oil does a 2019 Subaru Outback 2.5 L take?
5.1 quarts
Oil Grade: SN
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Torque: | 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
