What size rod is a EJ20?
The EJ20 engine, commonly found in Subaru vehicles, typically uses a 2.0-liter piston rod. This rod size is designed to handle the engine's displacement and power output.
Explaining the EJ20 Engine
The EJ20 is a 2.0-liter flat-four (boxer) engine produced by Subaru. It was first introduced in 1989 and has been used in a variety of Subaru models, including the Impreza, Legacy, and Forester. The EJ20 is known for its reliability, performance, and the distinctive sound of its boxer configuration.
Piston Rod Size
The piston rod, also known as the connecting rod, is a crucial component that connects the piston to the crankshaft. The size of the piston rod is determined by the engine's displacement and the expected power output. For the EJ20 engine, the typical piston rod size is 2.0 liters, or 2.0L.
- The EJ20 engine has a bore (cylinder diameter) of 92 mm and a stroke (piston travel) of 75 mm, resulting in a total displacement of 1,994 cc (2.0 liters).
- The piston rod length is designed to match the engine's stroke and provide the optimal connecting geometry for efficient power transfer.
- The piston rod material is typically forged steel or aluminum alloy, depending on the specific EJ20 variant, to balance strength, weight, and cost considerations.
The 2.0-liter piston rod size is a key component that allows the EJ20 engine to deliver its characteristic performance and reliability in Subaru vehicles.
Is EJ20 SOHC or DOHC?
The EJ20X and EJ20Y engines had an aluminium alloy cylinder head with cross-flow cooling, double overhead camshafts (DOHC) per cylinder bank and four valves per cylinder that were actuated by roller rocker arms.
What part number is EJ20 crankshaft?
12200AA240
Subaru OEM Crankshaft - EJ20 (02-05 WRX)
| SKU | 12200AA240 |
|---|---|
| Brand | Subaru OEM |
How long is a 302 rod?
Measuring Connecting Rod Length
| Displacement Cubic Inches | Liters | Rod Length (in) |
|---|---|---|
| 302 (Boss) | 5.0 | 5.1500 |
| 302 (SVO) | 5.0 | 5.1500 |
| 351 W (1969-70) | 5.8 | 5.9560 |
| 351 W (1971-96) | 5.8 | 5.9560 |
How long is the conrod on a Subaru EJ20?
130.50 mm
Subaru, EJ20 / EJ25, 130.50 mm Length, Connecting Rod Set.
How long is a Toyota 2JZ rod?
Toyota 2JZ
| Toyota 2JZ Crankshafts - Full Counterweight | ||
|---|---|---|
| Rod Length | Pin | typical weight |
| 5.590 | 52mm | 635g. |
| 5.590 | 47.95mm | 666g. |
| Bearings, Pistons and Head Studs : | Also Available |
When did Subaru stop using the EJ20?
March 2020
EJ20 (2.0L Boxer Turbo/NA) At the 46th Tokyo Motor Show in October 2019, Subaru announced it would conclude production of the EJ20 by the end of March 2020.
How long is a K20 Conrod?
Honda, K20, 139.00 mm Length, Connecting Rod.
How much HP can an EJ20 handle?
300 whp:The EJ20/EJ25 engines can handle 300 whp maximum with stock internals with no further modifications other than a proper fuel management tune. 400 whp:We suggest a set of forged AMR pistons and billet rods to safely boost up the engine.
What size is the EJ20 engine?
BROWSE LOW COST EJ20 ENGINES
EJ20 engine is part of the EJ engine series manufactured by Subaru. This kind of engine was introduced in 1988. EJ20 is a 2.0L 4-cylinder, petrol boxer engine that appeared first under the bonnet of Subaru Legacy.
What size crankshaft is a EJ20?
Subaru EJ20 / EJ25
| Compstar Billet Subaru EJ20 Crankshafts | |
|---|---|
| Part # | Length |
| C26101 | 5.138" / 130.5mm |
| C26101-CA | 5.138" / 130.5mm |
| C26102 (+ 2mm) | 5.217" / 132.5mm |
