Loading

What size wiper blades for Toyota C-HR?

The front wiper blades are typically 26 inches on the driver’s side and 17 inches on the passenger’s side, with the rear blade usually around 12 inches. Always verify the exact size for your year and market.


Front wiper blades


For the front, most Toyota C-HR versions use two different lengths to fit the swept area and ensure full visibility. Use the following sizes as a baseline, but confirm for your specific model year and market.



  • 26-inch driver-side blade

  • 17-inch passenger-side blade


After replacing front blades, ensure both sweep evenly across the windshield and that the blades clear the entire area without streaks. If you replace just one blade, consider replacing both to maintain balanced performance and visibility.


How to confirm size for your model year


To verify the correct sizes, check your owner's manual or the OEM parts catalog for your exact year and market. You can also remove the current blade and measure its length, or ask a dealership or auto parts retailer to confirm based on your VIN.


Rear wiper blade


The Toyota C-HR generally uses a single rear wiper blade. In most markets, the common size is around 12 inches, though some years or regions may vary slightly between 11 and 12 inches. Always check the specific specification for your vehicle.



  • 12-inch rear blade (common, varies by year/market)


When replacing the rear blade, ensure you choose the correct attachment style (hooked or pin) and the correct mount for your C-HR’s rear arm to ensure secure fit and optimal wiping performance.


How to confirm rear size


Consult the owner’s manual or a trusted parts retailer with your vehicle’s year, market, and VIN. If in doubt, measure the existing blade or bring the old blade to a parts counter for an exact match.


Summary


For most Toyota C-HR models, the typical sizes are front: 26 inches (driver) and 17 inches (passenger); rear: about 12 inches. Always verify by checking the manual or a parts catalog for your specific year and market, as sizes can vary by region and model year. When replacing blades, consider replacing both front blades at the same time for best performance and visibility.

What size wiper blades for Toyota C-HR?


The Toyota C-HR uses a 26-inch driver-side wiper blade, a 16-inch passenger-side wiper blade, and a 14-inch rear wiper blade for model years 2016 through 2023. It is important to confirm the exact sizes for your specific model year, as some sources indicate a 28-inch driver-side blade and 14-inch passenger-side blade for 2020 and newer models. 
Front windshield

  • Driver's side: 26 inches (for 2016-2019 models) or 28 inches (for 2020-2023 models) 
  • Passenger's side: 16 inches (for 2016-2019 models) or 14 inches (for 2020-2023 models) 

Rear window
  • Rear: 14 inches 



Why is Toyota discontinuing the Chr?


The Toyota C-HR was discontinued in North America after the 2022 model year due to low sales compared to the more popular Corolla Cross, which offers a combination of utility and efficiency. Other factors contributing to its discontinuation included its small interior space, underpowered engine, and the fact that it was only available in front-wheel drive. The Corolla Cross was the more practical choice for buyers and has become the smallest crossover in Toyota's lineup.
 

  • Lower sales: The C-HR never reached the sales figures of competing models, and even the Corolla Cross sold significantly more units when it was introduced. 
  • Practicality issues: The C-HR's stylish, coupe-like design came at the cost of a cramped rear seat and limited cargo space. 
  • Performance: The 2.0-liter four-cylinder engine with 144 horsepower was seen as underpowered, and it was only offered in a front-wheel-drive configuration, which was less appealing to consumers looking for more capability. 
  • Internal competition: The Corolla Cross was a more practical and appealing option that cannibalized C-HR sales and offered all-wheel drive, which was a key feature for many buyers. 
  • Product lineup evaluation: Toyota is constantly evaluating its product lineup, and the C-HR's discontinuation made way for other models like the Corolla Cross, which offered a better combination of utility and efficiency for the compact SUV segment. 



What size wiper blades for 2018 Toyota C-HR?


The wiper blade sizes for a 2018 Toyota CH-R are 26 inches for the driver's side, 16 inches for the passenger's side, and 14 inches for the rear window.
 

  • Driver's side: 26 inches
  • Passenger's side: 16 inches
  • Rear: 14 inches



What size windshield wipers do I need for a 2018 Honda HRV?


The 2018 Honda HR-V wiper blade sizes are: 26 inches for the driver's side, 18 inches for the passenger's side, and 10 inches for the rear window. 

  • Driver's side: 26 inches
  • Passenger's side: 18 inches
  • Rear window: 10 inches


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.