Do all mazdas have the same bolt pattern?

The short answer is no. Mazda uses more than one bolt pattern across its lineup; the two most common are 4x100 mm and 5x114.3 mm, with variations by model and generation. Always verify the exact spec for your vehicle before buying wheels.

Beyond that immediate takeaway, wheel fitment matters for safety and performance, especially if you’re swapping wheels or upgrading from stock. This article outlines how Mazda’s bolt patterns vary over time and how to confirm your specific model’s requirements.

Patterns you’re likely to encounter

To help readers grasp what to expect when shopping for Mazda wheels or tires, here are the two bolt-pattern families you are most likely to see on Mazda vehicles.

• 4x100 mm (4 lug holes on a 100 mm circle): seen on several older Mazda models, including some Miata generations and other compact cars from earlier eras.


• 5x114.3 mm (5 lug holes on a 114.3 mm circle): widely used on many contemporary Mazdas, including newer sedans, SUVs, and many versions of the MX-5 platform.

Note: There are exceptions and historical deviations. Always confirm your exact model-year spec with official sources or a Mazda dealer before purchasing wheels.

How to verify your specific bolt pattern for your Mazda

Use these steps to determine your car’s precise bolt pattern and related wheel fitment details.

1. Identify your exact model, year, and trim, and look up the official wheel specifications in Mazda’s parts catalog or owner's manual.


2. Look at the wheel hub to count lug holes and determine PCD (e.g., 4 or 5 lug pattern).


3. Measure the bolt circle diameter: the distance between opposite lug holes in millimeters (e.g., 100 mm or 114.3 mm).


4. Check the center bore size on the hub and the wheel; note if hub-centric rings are necessary for proper alignment.


5. Confirm the wheel offset (ET) and the thread size/lug-nut type compatible with your hub.

Concluding: With the exact PCD, center bore, offset, and thread size in hand, you can confidently choose wheels that fit safely or determine if adapters or rings are required.

Why bolt patterns vary across Mazda models

The variation reflects Mazda’s diverse product lineup and evolving platform strategies. Different vehicle classes—compact cars, sedans, crossovers, and roadsters—often adopt wheel designs that balance performance, weight, and production costs. In practice, this means a Miata’s wheels rarely interchange with a CX-5 without modification or adapters, even though both are Mazda products.

Summary

Mazdas do not share a single bolt pattern. Across its history, the lineup has used at least two common patterns—4x100 and 5x114.3—with other variations appearing in older generations or niche models. For wheel swaps, the critical details are the bolt pattern (PCD), center bore, offset, and lug-nut size. Always verify the exact specifications for your specific vehicle to ensure a safe and proper fit.

Are all Mazda rims the same?

The generic answer is yes: all recent Mazdas (with 5 bolts holes) have wheels that will fit other Mazdas. The exceptions include drastic differences in offset and if the wheels are too small to fit around the brake calipers. Personal examples include: RX-8 wheels on a Mazda3, Mazda3 wheels on a CX-5.

Is the Mazda 5x114 3?

Mazda MX-5 Miata: Renowned for its handling and lightweight design, the Miata utilizes the 5x114. 3 pattern to enhance its performance capabilities.

What is the bolt pattern on a Mazda?

Most modern Mazda vehicles use a 5x114.3 (5x4.5 inch) bolt pattern, which is common on models like the Mazda 3 and CX-5. However, older models and different vehicles, such as some Miata generations, use different patterns, including 4x100 or other variations. It is essential to check your specific model and year for the correct bolt pattern. 
Common Mazda bolt patterns

• 5x114.3 (5x4.5 inch): Very common on many modern Mazdas. 
  • Used on all generations of the Mazda 3. 
  • Used on the Mazda CX-5. 
• 4x100: Found on older models, such as some earlier Mazda Miata generations. 
• Other patterns: Mazda has used various other patterns throughout its history, including 4x108, 4x110, 4x120, and 5x100. 

How to determine your specific bolt pattern

1. Check your vehicle's owner's manual: This is the most reliable source for your car's specifications.
2. Look up your vehicle online: Use a wheel and tire size search tool on an auto parts website and enter your specific make, model, and year. 
3. Physically measure the bolt pattern: 
   • Count the number of lug nut holes (e.g., 4 or 5). 
   • For an even number of holes, measure from the center of one hole to the center of the hole directly across from it. 
   • For an odd number of holes, measure from the center of one hole to the center of the space directly across from it (in between two holes). 
   • Divide the measurement in millimeters by 25.425.425.4 to convert it to inches. 

What other wheels fit the Mazda 3?

Most Mazda 3 models use a 5x114.3 (or 5x4.5) bolt pattern, which is the key specification for finding wheels that will fit. For wheel dimensions, common aftermarket sizes include diameters from 17 to 19 inches, widths between 7 and 8.5 inches, and an offset between +37 and +50, though this can vary depending on the model year and your desired look. 
This video explains the wheel fitment for the 2019-2025 Mazda 3: 57sthreepiece.usYouTube · Aug 28, 2024
Bolt pattern

• 5x114.3: (or 5x4.5) is the standard bolt pattern for nearly all Mazda 3 models, making it a widely compatible lug configuration. 

Common wheel dimensions (aftermarket)

• Diameter: 17 to 19 inches is popular for aftermarket upgrades. The factory sizes typically range from 16 to 18 inches. 
• Width: 7 to 8.5 inches is a common range. 
• Offset: An offset between +37 and +50 is generally recommended, but +38 is considered a near-perfect fitment for many models. Lower offsets (like +35) will push the wheel out further, creating a "slight poke" effect. 

Important considerations

• Suspension clearance: Be mindful of the front strut clearance, especially when choosing a wider wheel or a lower offset. Too wide or too low of an offset can cause the wheel to rub against the strut. 
• Tire size: Always match your new wheel with an appropriately sized tire to maintain correct speed and handling. A common factory size for 18-inch wheels is 215/45R18, but aftermarket options like 225/45R18 or 235/40R18 are also popular. 
• Model year: Check your specific model year for the most accurate fitment information. Some generations have specific recommendations.