Does Ram use Dana axles?
The short answer is: not exclusively. Ram trucks have used axles from multiple suppliers over the years, including Dana Spicer, American Axle Manufacturing (AAM), and other vendors. The exact axle configuration depends on the model, year, and production run.
To understand Ram’s axle sourcing in detail, it helps to look at how supplier choices have varied across Ram’s lineup and over time. Ram’s light-duty and heavy-duty pickups have seen changes in their axle assemblies as platforms evolved, with Dana Spicer appearing in some configurations while others came from different suppliers. The best way to know what sits under a specific truck is to check the axle tag, build sheet, or the official parts catalog for that exact VIN.
The supplier landscape by model and generation
Ram’s axle supply has evolved, and the parts list varies by model and year. Dana Spicer components have shown up in certain configurations, but American Axle Manufacturing (AAM) and other vendors have also supplied axles for various Ram trucks. Because the same model line can use different axles across generations or regional production, there is no single supplier across the entire Ram lineup.
- Light-duty Ram 1500: Axle assemblies have been sourced from multiple vendors depending on the year and trim level; Dana Spicer parts may appear in some configurations, while others use alternatives.
- Heavy-duty Ram 2500/3500: Similar variation exists; the axle design and supplier can change with different packages or production runs.
- Special variants (such as performance-offered models): Axe configurations can differ from standard models, potentially involving different suppliers to meet performance and durability requirements.
Conclusion: Dana axles are part of Ram’s supplier mix in some cases, but they are not guaranteed across every Ram truck. Verification for a specific vehicle requires looking up the VIN’s build data or consulting the parts catalog.
How to verify the axle on your Ram
To determine the exact axle manufacturer for your Ram, use these steps:
- Check the axle stamping: Look for markings on the differential cover or axle tubes that indicate the brand (e.g., Dana Spicer, AAM) or specific part numbers.
- Review the build sheet or VIN data: The vehicle’s window sticker, Monroney label, or factory build sheet lists axle components and suppliers for that exact vehicle.
- Inspect the differential housing and casting numbers: Distinct casting numbers can be cross-referenced with official catalogs to identify the supplier.
- Consult the service manual or parts catalog for your model/year: OEM documentation will specify the axle assembly and its supplier.
- Ask a dealer or a licensed Ram/Stellantis technician: They can retrieve the exact axle information from VIN-based databases.
By cross-referencing markings, build data, and official catalogs, you can confirm whether your Ram uses Dana axles for that particular vehicle.
Summary
Ram’s axle strategy is diversified. Dana Spicer components have appeared on some Ram trucks, but the brand does not rely on a single supplier for all models. The precise axle supplier varies by model, year, and production run. For an accurate answer about a specific vehicle, verify the axle via stamping, the VIN/build sheet, or official parts catalogs.
Does Dodge use Dana axles?
The Dana/Spicer Model 60 is an automotive axle manufactured by Dana Holding Corporation and used in OEM pickup and limited passenger car applications by Chevrolet, Dodge, Chrysler, Jeep, Ford and Land Rover.
What vehicles use Dana axles?
The Dana 44 has seen use in Chevrolet Corvettes and Dodge Vipers. This axle is referred to as a Dana 44 ICA or Dana 44 IRS. All 1980–1982 Chevrolet Corvette C3 and manual transmission equipped 1985–1996 Chevrolet Corvette C4 had this axle. The 2005–06 Pontiac GTO, The Dodge Viper has always used a Dana 44 IRS setup.
Who makes Ram axles?
“AAM is pleased to continue our long-term partnership with Ram as the supplier of axles and driveshafts for the 2500 and 3500 Heavy Duty pick-up trucks.
What rear axle is in a Dodge Ram 2500?
Dodge 12 Inch Rear Axle 2019+ RAM 2500 3500 3.73-4.88 Ratio Face Hobbed Ring and Pinion.
