How many quarts of oil does a 2018 Subaru Crosstrek use?
The 2018 Subaru Crosstrek requires 4.4 quarts of oil for a standard oil change. This includes the oil filter replacement as well.
Detailed Oil Change Information for the 2018 Subaru Crosstrek
The 2018 Subaru Crosstrek is a compact crossover SUV that was introduced as a redesigned model that year. It comes equipped with a 2.0-liter four-cylinder Boxer engine that requires a specific oil change procedure and amount of oil to be used.
Oil Change Procedure and Capacity
- The 2018 Subaru Crosstrek requires 4.4 quarts of 0W-20 synthetic motor oil for a standard oil change.
- This includes replacing the oil filter, which is located on the bottom of the engine.
- Subaru recommends changing the oil every 6 months or 7,500 miles, whichever comes first.
- It's important to use the correct 0W-20 oil specification recommended by Subaru to ensure proper lubrication and engine protection.
Following the proper oil change procedure and using the right amount and type of oil is crucial for maintaining the 2018 Subaru Crosstrek's engine health and performance over time.
Can I use 5W20 instead of 0W20?
If SAE 0W-20 synthetic oil is not available, SAE 5W-20 conventional oil may be used. However, it must be replaced with SAE 0W-20 synthetic oil at the next oil change.
How many quarts of oil does a 2018 Subaru Crosstrek 2.0 L take?
4.6 quarts
Oil Grade: SN
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.6 quarts (with filter). After refill check oil level. |
| Torque: | 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
How much oil does a 2.5 L engine take?
Capacities and Specifications - 2.5L
| Item | Capacity |
|---|---|
| Engine oil fill capacity including the oil filter. | 5 L (1.1 gal) |
| Engine oil fill capacity excluding the oil filter. | 4.6 L (1.0 gal) |
| Engine coolant fill capacity. | 6.8 L (1.5 gal) |
| Fuel tank fill capacity. | 60 L (13.2 gal) |
How many quarts of oil for a 2018 Crosstrek?
4.6 quarts
Oil Grade: SN
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.6 quarts (with filter). After refill check oil level. |
| Torque: | 31 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
How much oil does a 2.5 L Subaru engine take?
5.1 quarts
For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts.
How much engine oil does a Subaru 2.5 I take?
For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts. Again, you'll want to check the level to make sure you don't have too much or not enough oil.
How much oil does a Subaru Crosstrek 2.5 take?
4.7 quarts
A 2023 Subaru Crosstrek takes 4.7 quarts of oil. How much oil you should use depends considerably on the type of car, engine size, and type of oil.
How much oil does a 2018 Subaru Legacy 2.5 take?
Capacity: 5.1 quarts (with filter). After refill check oil level.
What is the best motor oil for 2018 Subaru Crosstrek?
0W-20 synthetic oil
The Subaru Crosstrek oil type for the most recent models is 0W-20 synthetic oil. Using OEM Subaru oil is always the right choice for your Crosstrek, since this auto fluid is designed specifically for Subaru models and provides the performance boost you crave while driving around Pasadena and the surrounding areas.
How often does a 2018 Subaru Crosstrek need an oil change?
Subaru advises getting your 2018 Subaru Crosstrek Hybrid oil & filter changed each 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed each 7,500 - 10,000 miles. Keep in mind it's best to check your owner's manual and confer your dealer to find out the intervals that work best for your car.
