How much horsepower does a Dodge 330 have?
There isn’t a single horsepower figure for the Dodge 330; horsepower varied by engine and year. In the 1960s models dubbed 330, you could see roughly 145 hp with the base 225 cu in Slant-Six, about 180 hp with the 273 cu in V8, and around 230 hp with the 318 cu in V8.
Overview of the Dodge 330
The Dodge 330 was a mid-level full-size car name used in Dodge's lineup during the early 1960s. It offered multiple engine options to balance economy and performance, but it was not marketed as a high-performance model in the way later muscle cars would be. Its power figures reflect the era’s approach to standard, optional, and premium drivetrains.
Engine options and horsepower
Below are the typical engine choices and their approximate horsepower figures for the Dodge 330 during its most common years. Numbers refer to the era’s gross horsepower ratings, and actual usable power can vary by condition and configuration.
- 225 cubic inch (3.7 L) Slant-6 engine — roughly 145 horsepower
- 273 cubic inch (4.5 L) V8 engine — roughly 180 horsepower
- 318 cubic inch (5.2 L) V8 engine — roughly 230 horsepower
Note: Some 318 V8 configurations in later years could produce higher outputs with additional options, but the three listed above cover the core Dodge 330 lineup from the early to mid-1960s. For precise figures on a specific car, check the VIN, build sheet, or original window sticker.
Year-by-year context
- 1963 Dodge 330: standard 225 Slant-6 (about 145 hp); available 273 V8 (about 180 hp) and 318 V8 (about 230 hp).
- 1964 Dodge 330: engine options largely continued with similar horsepower ratings; minor refinements did not dramatically change the power outputs.
These figures reflect the period’s ratings and configurations. If you’re evaluating a particular car, the actual engine, carburetion, exhaust, and any modifications can shift horsepower from the base ratings.
Practical considerations when evaluating horsepower
When assessing horsepower for a classic Dodge 330, consider that true performance also depends on weight, gearing, suspension, and condition. A well-tuned 225 Slant-6 can deliver brisk daily driving, while a 273 or 318 V8 can provide stronger acceleration, especially with a manual transmission or a highway-friendly rear end ratio.
Summary
The Dodge 330 did not have a single horsepower figure; it offered a range depending on engine: around 145 hp with the Slant-6, about 180 hp with the 273 V8, and roughly 230 hp with the 318 V8 in its classic 1960s form. For exact numbers on a specific car, consult its build documentation or decode its VIN.
How much horsepower does a 1973 Dodge Dart Sport 340 have?
240 net hp
Rated at 240 net hp, the 340 Sport was the hottest in the lineup that year….” Offered here is an1973 Dodge Dart, fully restored, up-powered, and tastefully modified for a street-racer presentation.
How much is a 1964 Dodge Dart worth today?
Typically, you can expect to pay around $9,650 for a 1964 Dodge Dart 270 in good condition with average spec. What is the highest selling price of a 1964 Dodge Dart 270? The highest selling price of a 1964 Dodge Dart 270 at auction over the last three years was $26,250.
What is a Dodge 330?
The Dodge 330 is a mid-size car marketed by Dodge for the 1962 model year as a trim level above the base Dodge Dart. For the 1963 and 1964 model years, the 330 was the base trim of the mid-size lineup. It is one of the first unibody vehicles using the B-Body.
How much horsepower did a 1978 Dodge 360 have?
In 1978, compression ratios were relatively low due to emissions regulations—typically around 8.0:1—but the engine still produced between 150 and 175 horsepower, with torque figures in the 250–280 lb-ft range depending on application.
