How much oil does a 2004 4.7 Dodge take?
The 2004 Dodge 4.7-liter V8 engine requires approximately 5 quarts of oil for a standard oil change. This includes the oil filter replacement. The exact oil capacity may vary slightly depending on the specific model and configuration of the 2004 Dodge vehicle.
Detailed Answer
The 2004 Dodge 4.7-liter V8 engine is a popular powertrain option found in several Dodge models, including the Ram pickup truck, Durango SUV, and Dakota midsize truck. This engine has a total oil capacity of around 5 quarts, which includes the oil filter.
When performing a standard oil change on a 2004 Dodge 4.7L V8, you will need to replace approximately 5 quarts of engine oil. It's important to use the recommended oil type and viscosity specified by Dodge for this engine, which is typically 5W-20 or 5W-30 synthetic blend motor oil.
Oil Change Procedure
- Locate the oil drain plug, usually at the bottom of the oil pan, and drain the old oil.
- Replace the oil filter, which is typically accessible from the top or side of the engine.
- Pour in approximately 5 quarts of the recommended motor oil.
- Start the engine and check for any leaks.
- Allow the engine to run for a few minutes, then check the oil level using the dipstick.
- Top up the oil if necessary to bring the level to the full mark on the dipstick.
It's always a good idea to consult your owner's manual or the Dodge service information for the exact oil capacity and recommended oil type for your specific 2004 Dodge model and engine configuration.
How many quarts of oil does a 2002 Dodge Ram 1500 4.7 L take?
6 qt.
What is the best oil for a 2004 Dodge Ram 1500?
The RAM 1500 with the 5.7L V8 HEMI engine requires SAE 5W-20 full synthetic oil. Using synthetic oil means you can schedule oil changes for every 10,000 miles. Use seven quarts to refill after draining the old oil and replacing the filter.
How many quarts of oil does it take to fill up a V8?
6.5 to 7 quarts is fine.
How much oil does a 2004 Dodge Ram 4.7 take?
It also uses SAE 5W30 oil (synthetic). Comparatively, the 4.7L engine requires 6 quarts of oil, and the 5.7L engine requires 7 quarts.
How much horsepower does a Dodge 4.7 liter V8 have?
And to put this engine's poor performance in context. We can look at the 2007. Dodge Ram 1500. Which could be had with three different engines two of which were the 4.7 liter V8.
How many cubic inches is a 4.7 liter Dodge engine?
286.7 cu in
The displacement is 4.7 L; 286.7 cu in (4,698 cc) with a bore and a stroke of 3.66 in × 3.405 in (93.0 mm × 86.5 mm).
How much oil does a 4.7 Dodge V8 take?
Capacity: 6.6 quarts Initial Fill.
What kind of oil does a 2003 Dodge RAM 1500 4.7 take?
The base 2003 Dodge Ram 1500's engine the 3.7L V6 requires 5 quarts of 10W30 oil. The Ram 1500 with the 4.7L V8 engine option uses 6 quarts of 5W30 oil. The optional 5.7L V8 engine for the 2003 Ram 1500 requires 7 quarts of 5W30 oil.
How many quarts of oil does a Dodge Ram 1500 take?
six quarts
Now, for the answer to “how much oil does a RAM 1500 take?” The Pentastar® V6 engine needs six quarts of oil to properly lubricate the engine system. If you're using the HEMI® engine, however, the larger size and extra cylinders will require that you use seven quarts of oil to properly lubricate the engine.
How much horsepower does a 4.7 liter V8 Dodge engine have?
And to put this engine's poor performance in context. We can look at the 2007. Dodge Ram 1500. Which could be had with three different engines two of which were the 4.7 liter V8.
