How much oil does a 2008 Toyota 3.5 take?
About 6.4 quarts (approximately 6.1 liters) of engine oil is used for a full drain and filter change on most 2008 Toyotas with the 3.5L V6. Exact capacity can vary slightly by model and filter size, so always verify with the owner's manual or service manual for your specific vehicle.
In practical terms, the 2008 3.5L V6 refers to the 2GR-FE engine family, which appears in several models such as the Camry, Avalon, Highlander, and Sienna. The standard oil capacity is generally 6.4 quarts with a new filter, though some sources round to 6.0 quarts depending on measurement or filter specifics. After draining and changing the filter, top up to the full mark on the dipstick as needed.
Models and common capacity
Below is a quick reference for the main 2008 Toyota models that used the 3.5L V6 (2GR-FE). The capacity figure refers to a full oil change with the filter replaced.
- 2008 Toyota Camry (3.5L V6, 2GR-FE): oil capacity typically 6.4 quarts (6.1 L) with filter.
- 2008 Toyota Avalon (3.5L V6, 2GR-FE): oil capacity typically 6.4 quarts (6.1 L) with filter.
- 2008 Toyota Highlander (3.5L V6, 2GR-FE): oil capacity typically 6.4 quarts (6.1 L) with filter.
- 2008 Toyota Sienna (3.5L V6, 2GR-FE): oil capacity typically 6.4 quarts (6.1 L) with filter.
Note: Some sources round to 6.0 quarts or 6.4 quarts depending on measurement practices or filter size. Always confirm with the exact vehicle’s manual or a dealer service bulletin for your VIN.
Oil type and change timing
The 3.5L V6 in 2008 Toyotas generally uses SAE 5W-30 engine oil in most climates. Use a high-quality API service category SM or ILSAC GF-5 grade as recommended by Toyota, and choose synthetic blend or full synthetic if you want extended drain intervals. Typical change intervals are about 5,000 miles (8,000 km) with conventional oil or 7,500–10,000 miles (12,000–16,000 km) with synthetic, depending on driving conditions. Always follow the owner's manual and adjust for severe driving or extreme temperatures.
Summary
For a 2008 Toyota with a 3.5L V6, plan on about 6.4 quarts of engine oil for a standard oil change with a new filter. Use the recommended grade (usually 5W-30) and verify on the dipstick to reach the full level. If in doubt, consult the owner's manual or a Toyota service center for your exact model and VIN.
