How much oil does a 2010 Acura CSX take?
The 2010 Acura CSX, a compact luxury sedan, requires 4.2 quarts (4 liters) of oil for a standard oil change. This information is based on the vehicle's owner's manual and various automotive repair resources.
Detailed Overview
The 2010 Acura CSX is powered by a 2.4-liter, 4-cylinder engine. This engine requires a specific oil type and quantity to ensure proper lubrication and performance. According to the vehicle's owner's manual, the recommended oil type for the 2010 Acura CSX is 0W-20 synthetic motor oil.
When it comes to the oil change interval, Acura recommends changing the oil and filter every 7,500 miles or 12 months, whichever comes first. This is to maintain the engine's optimal condition and prevent any potential issues.
Oil Change Procedure
To change the oil in a 2010 Acura CSX, you will need the following supplies:
- 4.2 quarts (4 liters) of 0W-20 synthetic motor oil
- Oil filter
- Oil drain pan
- Wrench or socket set
The oil change process typically involves the following steps:
- Park the vehicle on a level surface and apply the parking brake.
- Locate the oil drain plug, usually located at the bottom of the oil pan, and place the drain pan underneath.
- Using the appropriate wrench or socket, loosen and remove the drain plug to allow the old oil to drain out.
- Once the oil has fully drained, replace the drain plug and tighten it securely.
- Locate the oil filter, typically accessible from the top or side of the engine, and use an oil filter wrench to remove it.
- Apply a thin coat of new oil to the gasket of the new oil filter, then screw it on by hand until it is snug.
- Locate the oil fill cap, usually on the top of the engine, and pour in the 4.2 quarts (4 liters) of new 0W-20 synthetic motor oil.
- Start the engine and check for any leaks around the oil filter and drain plug.
- Allow the engine to run for a few minutes, then check the oil level using the dipstick. Top up the oil if necessary.
Remember to properly dispose of the old oil and filter in an environmentally responsible manner.
What kind of oil does a 2010 Acura take?
If you own a TL between model years 2004-2014, your engine's recommended oil is 5W-20, a fully synthetic oil; if your Acura TL model is even older, from model years 1999-2003, the most versatile and safe oil to use in your engine is 5W-30 synthetic oil.
Is Acura CSX good on gas?
Fuel consumption is 10.2 L/100 km (28 mpg‑imp; 23 mpg‑US) city, 6.8 L/100 km (42 mpg‑imp; 35 mpg‑US) highway with a minimum of 91 octane AKI fuel required.
How much oil does a 3.5 L v6 Acura take?
Oil Grade: API*
Capacity: 5.3 quarts.
How much oil does an Acura need?
It takes around five quarts of oil for a full Acura MDX oil change, and your SUV will be cruising through Turlock and Stockton like a dream!
Does Acura CSX need premium gas?
The CSX uses regular unleaded gasoline (Min 87 AKI), while the Type S model uses premium gasoline (Min 91 AKI).
How many miles do Acura engines last?
MotorAsk.com – “Acuras can last anywhere from 250,000 to 300,000 miles with proper maintenance. According to Acura owners, some of the brand's vehicles can even last 400,000 miles or more in ideal conditions and with a responsible owner…
How much oil does an Acura CSX take?
4.2 litres (with filter). After refill check oil level.
How much oil does a 2.4 L Acura take?
4.4 quarts (with filter).
Is the 2010 Acura CSX reliable?
Detailed ratings
| The Car Guide rating | 78% |
|---|---|
| Safety | 8/10 |
| Interior | 7/10 |
| Reliability | 9/10 |
| Winter driving | 7/10 |
How many quarts of oil will I need?
Most engines require between 5 and 8 quarts of motor oil regardless of the season. But that's just an estimate! For your particular vehicle's oil capacity, refer to your vehicle owner's manual.
