How much oil does a 2014 Chevy Express 1500 4.3 take?
The 2014 Chevy Express 1500 with the 4.3-liter V6 uses 6 quarts (about 5.7 liters) of engine oil when you replace the filter. This is the official capacity, and you should fill to the full mark after an oil change. This article explains the capacity and how it applies in routine maintenance.
In this article, we break down the official oil capacity for this engine, what that means for maintenance routines, and practical steps to ensure you reach and verify the correct oil level when servicing a 2014 Express 1500. Readers should also consult the owner’s manual or a GM service advisor for any model-specific notes or updates.
Official capacity and what it means
The engine’s official oil capacity is 6 quarts (5.7 liters) with a new filter installed. This means that a typical oil change that includes replacing the filter will require about 6 quarts of oil to bring the system to the proper full level. If you drain the oil and do not replace the filter, the amount you need to add may differ slightly, so always verify with the dipstick after refilling.
Oil type and grade
For most engines of this era, GM generally recommends an API service grade of 5W-30 with a Dexos1 Gen 2 approval for gasoline engines. Always confirm the exact specification recommended for your vehicle in the owner's manual or by contacting a GM dealer, as regional climate and oil formulation can influence the best choice.
Maintenance steps and considerations
To ensure you meet the engine’s capacity during maintenance, follow a clear checklist that accounts for both the quantity and the proper process.
- 6 quarts (5.7 liters) of oil with a new filter should be on hand to complete a full-fill change.
- Use an oil that meets Dexos1 Gen 2 specifications and the recommended viscosity (commonly 5W-30 for this engine).
- Replace the oil filter during the change to ensure the full capacity is properly circulated and measured.
- After pouring in the oil, run the engine for a few minutes, turn it off, wait a few minutes, then check the level with the dipstick and top off to the full mark if needed.
Following these steps helps ensure you achieve the correct fill and maintain proper lubrication for the engine’s longevity.
Summary: The 2014 Chevy Express 1500 with a 4.3L V6 takes 6 quarts of engine oil with a new filter (about 5.7 liters). Use the recommended oil grade and Dexos1 Gen 2 approval, replace the filter, and verify the level with the dipstick after a short engine run to ensure a correct fill.
How much oil does a 2014 Chevy Express 1500 take?
Notes: Full synthetic high mileage. 5W-30. 5 quart.
How much oil does a 18 Chevy Express 4.3 take?
7.4 quarts Initial Fill.
How much oil does a 4.3 L V6 Chevy 1500 take?
Capacity: 6 quarts (with filter).
What kind of oil does a 4.3 L V6 take?
5W-30
4.3L V6 (where equipped): 5W-30 (dexos1)
