What is the torque for transmission drain plug 2017 Honda Pilot?
The transmission drain plug on the 2017 Honda Pilot should be tightened to 29 ft-lbs (39 Nm).
What this means for owners and technicians
The 2017 Pilot uses a 9-speed automatic transmission, and the drain plug torque is specified to ensure a proper seal and reliable operation. Always verify with the latest Honda service data or the owner's manual, as exact figures can vary by market or production revision.
Core specification
Official guidance identifies the drain plug torque as 29 ft-lbs (39 Nm). Use a calibrated torque wrench and replace any required sealing washer per service data. Do not exceed the specified torque to avoid damaging threads or the pan.
Preparation and cautions
Before beginning the drain procedure, gather the necessary tools, fluids, and safety gear. The following items and steps help ensure the plug is torqued correctly and leaks are avoided.
Essential preparation items include:
- A torque wrench capable of at least 50 Nm and calibrated for accuracy.
- A replacement sealing washer if required by Honda's service data.
- Honda ATF DW-1 (or the ATF specified in the owner's manual) for the fill.
- Drain pan, rags, and basic hand tools.
Preparing properly helps ensure a clean job and accurate torque application.
Concluding note: Adhere to the official Honda service data and the vehicle’s manual for any updates or variations by region or transmission revision.
Steps to drain and torque the plug
To perform the drain and torque correctly, follow these steps:
- Warm the transmission to typical operating temperature, then park on level ground and engage the parking brake.
- Place a drain pan beneath the transmission drain plug; carefully loosen and remove the plug to allow the fluid to drain completely.
- Install a new sealing washer if required; reinstall the drain plug and tighten to 39 Nm (29 ft-lbs) with a torque wrench, ensuring even seating without over-tightening.
- Refill the transmission with the proper ATF as specified, then check the level according to the service procedure. Start the engine, cycle through gears if required, and recheck for leaks after the fluid settles.
These steps help ensure the drain plug is properly torqued and leaks are prevented.
Practical notes for owners
If you’re not equipped to perform this maintenance, consider taking the vehicle to a certified technician to avoid cross-threading, improper sealing, or transmission damage.
Summary
The official torque specification for the 2017 Honda Pilot transmission drain plug is 29 ft-lbs (39 Nm). Use the recommended ATF and follow Honda’s service guidance for the drain and fill procedure, and verify any model-year or regional variations with the latest service data.
