What is the torque on the 95 LS400 lug nuts?
The lug nuts on a 1995 LS400 are tightened to 76 ft-lbs (103 Nm) of torque. This is the factory guidance used for the original equipment wheels and hardware.
In practice, this value is applied to ensure even seating of the wheel against the hub and to maintain secure attachment during normal driving. If your vehicle has aftermarket wheels, lug nuts, or adapters, always verify with the wheel manufacturer or the official Lexus service manual, as those components can require different torque settings.
Official specification and practical guidance
According to Toyota/Lexus service documentation for late-1990s LS models, lug nuts should be torqued to 76 ft-lbs (103 Nm). Tightening should be done in a criss-cross (star) pattern to seat the wheel evenly against the hub. Use a calibrated torque wrench and recheck the final torque after seating if needed.
Tightening sequence and recheck
Apply the torque in a star sequence rather than a circular pattern to avoid warping the rotor or creating uneven seating. Tighten in increments: lightly snug each nut, then move toward the final torque in the star pattern. After installation, re-check the torque after driving 50–100 miles, especially if the wheel was removed or if aftermarket components were installed. If any lug nut feels loose, stop and re-torque to specification.
Notes for owners and maintenance tips
If your LS400 is equipped with aftermarket wheels, different lug nuts, or hub adapters, consult the wheel or hardware manufacturer for the correct torque specification. The 76 ft-lbs (103 Nm) standard is the commonly cited factory value for the 1995 LS400 and related years, but variations can occur with non-OEM configurations.
Summary
For a 1995 Lexus LS400, tighten the lug nuts to 76 ft-lbs (103 Nm) using a star pattern, and re-check after seating or wheel removal if applicable. Always confirm with the official manual when using aftermarket parts or non-standard hardware, and consider a re-torque after the first miles of driving when wheels have been serviced.
What is the lug torque on a 97 LS400?
Lexus Lug Nut Torque Specs, All Models.
| Model | Trim | Torque |
|---|---|---|
| LS400 | ALL / SEDAN | 80 ft-lbs |
| LS430 | 16-INCH / SEDAN | 80 ft-lbs |
| LS460 | 18-INCH / BASE | 105 ft-lbs |
| LS460L | 19"BASE / TOURNG PKG | 105 ft-lbs |
What is the specs of the 1995 Lexus LS400?
The 1995 Lexus LS 400 features a 4.0L V8 engine, a 4-speed automatic transmission, and rear-wheel drive. It produces 260 horsepower and 270 lb-ft of torque, with a curb weight of around 3,650 lbs and an EPA-estimated combined 19 mpg. Dimensions include a length of approximately 196.8 inches, a width of 72.0 inches, and a height of 56.7 inches.
This video provides a retro review of the 1995 Lexus LS400, highlighting its exterior and interior changes: 59sJosucarsnewsYouTube · Oct 15, 2023
Engine and performance
- Engine: 4.0L DOHC 32-valve V8
- Horsepower: 260 hp @ 5300 rpm
- Torque: 270 lb-ft @ 4500 rpm
- Transmission: 4-speed automatic
- Drivetrain: Rear-wheel drive
- 0-60 mph: Approximately 7.4 seconds
- Top Speed: 150 mph
Dimensions and weight
- Length: 196.85 inches
- Width: 72.04 inches
- Height: 56.69 inches
- Wheelbase: 112.2 inches
- Curb Weight: 3,650 lbs
Fuel economy
- City: 19 mpg
- Highway: 25 mpg
- Combined: 19 mpg
Interior and features
- Cargo Capacity: 14.9 cu. ft.
- Front Headroom: 38.9 inches
- Front Legroom: 43.8 inches
- Rear Headroom: 36.9 inches
- Rear Legroom: 36.9 inches
- Features: Available options included electronic air suspension, a power sunroof, leather upholstery, and a premium audio system.
What is the bolt pattern on a 1995 Lexus LS400?
The 1995 Lexus LS400 has a 5x114.3 or 5x4.5 bolt pattern. This means there are 5 bolt holes on a notional circle with a diameter of 114.3 millimeters or 4.5 inches.
- Bolt pattern: 5x114.3 mm (also expressed as 5x4.5 inches)
- Number of bolts: 5
- Center bore: 60.1 mm
- Thread type: 12x1.5
What is the torque spec for Lexus lug nuts?
Lexus lug nut torque specs vary by model, but many common models use 76 ft-lbs (103 Nm) or 103 ft-lbs (140 Nm). For the most accurate specification, you should always check your vehicle's owner's manual or the sticker inside the driver's door jamb. To ensure even pressure, tighten the lug nuts in a star pattern using a calibrated torque wrench.
Common Lexus lug nut torque specs
- 76 ft-lbs (103 Nm): This is a common torque for many models, including the CT (2011-2017), ES (2013-2023), GS (2013-2020), IS (2014-2020), LS (2013-2020), NX (2015-2023), RC (2015-2023), RX (2016-2022), and UX (2019-2023).
- 103 ft-lbs (140 Nm): This is the spec for newer models like the GX (2010-2023), IS (2021-2023), LC (2018-2023), LS (2021-2023), LX (2016-2023), and RX (2023-present).
Important tips
- Use a torque wrench: A calibrated torque wrench is essential to prevent under-tightening (which can cause the wheel to loosen) or over-tightening (which can damage studs).
- Follow a star pattern: Tighten the lug nuts in a star or cross pattern to ensure even pressure on the wheel.
- Re-torque after driving: After installing a wheel, it is recommended to re-torque the lug nuts after driving 50-100 miles to check for any settling.
