Loading

What kind of oil does a 2000 Integra take?

The 2000 Acura Integra typically requires 5W-30 engine oil, with about 4.5 quarts needed for an oil change including the filter. You can use conventional, synthetic blend, or full synthetic oil, as long as it meets the car’s API service requirements for gasoline engines.


This article explains the recommended viscosity, the oil type options, and practical guidance for maintaining oil in a classic Integra, including how to choose between conventional and synthetic formulations and what to look for on the label.


Recommended oil viscosity for the 2000 Integra


The following options reflect common guidance from manuals and automotive technicians for this model year, helping you choose based on climate and wear.



  • 5W-30: The standard recommendation for a broad range of temperatures and driving conditions; suitable for conventional, synthetic blend, or full synthetic oils.

  • 10W-30: Acceptable in consistently hot climates or when 5W-30 is unavailable; may have slightly different cold-start performance in cooler weather.


In everyday use, 5W-30 is usually the best all-around choice for the 2000 Integra. Reserve 10W-30 for extreme heat or if you’re unable to obtain 5W-30 and you monitor engine wear and performance accordingly.


Oil types and certifications


Choosing the right oil type depends on budget, climate, and how you want your engine protected. The options below are commonly used by Integra owners and technicians.



  • Conventional 5W-30: The most affordable option; adequate for normal driving and older engines if you’re on a budget.

  • Synthetic blend 5W-30: A balance between cost and protection; better high-temperature stability and wear resistance than conventional.

  • Full synthetic 5W-30: Highest level of protection and cleanability; often recommended for high-mileage engines or demanding driving, and it typically allows longer drain intervals when conditions are favorable.


All oil types should meet API service classifications for gasoline engines (current or at least SJ/SL and newer ones such as SM/SN/GF-5 compliant). When in doubt, choose a reputable brand and verify that the oil meets or exceeds the latest API/ILSAC specifications.


Capacity and change intervals


The 2000 Integra’s oil capacity is approximately 4.5 quarts (about 4.3 liters) with a full synthetic or conventional filter. Service intervals vary by oil type and driving conditions: conventional oil typically calls for 3,000–5,000 miles, synthetic blends 5,000–7,500 miles, and full synthetic 7,500–10,000 miles under normal conditions. In severe driving (lots of short trips, extreme temperatures, heavy loads), shorten the interval accordingly and check the level more frequently.


Practical maintenance tips


To maximize engine life and oil performance, follow these practical steps:



  • Always check the dipstick after refilling and adjust to the proper operating level.

  • Use a high-quality oil filter from a reputable brand to ensure adequate filtration and flow.

  • Keep receipts or records of oil changes to track intervals and oil type for future maintenance decisions.


Sticking with the recommended viscosity and a quality oil type, while respecting your climate and driving style, helps maintain the Integra’s reliability and performance over time.


Summary


For a 2000 Integra, 5W-30 engine oil is the typical choice, with an approximate capacity of 4.5 quarts including the filter. You can choose conventional, synthetic blend, or full synthetic oil, as long as the product meets API service requirements. The best option depends on climate, driving conditions, and budget, with 5W-30 favored for everyday use and 10W-30 as a hot-climate alternative. Always follow the owner’s manual and consult a qualified mechanic if you’re unsure about specific variants or unusual operating conditions.

What kind of oil does a 3.8 L V6 take?


5W-20



What type of oil does an Acura Integra need?


Mobil 1 – High Mileage 0W-20 Full Synthetic Motor Oil, Extends Engine Life, 5 Quart (Part No. 15015)



What oil does a 2000 Integra take?


Mobil 1 Full Synthetic Engine Oil 5W-30 5 Quart.



What kind of oil does a 2000 Acura take?


If you own a TL between model years 2004-2014, your engine's recommended oil is 5W-20, a fully synthetic oil; if your Acura TL model is even older, from model years 1999-2003, the most versatile and safe oil to use in your engine is 5W-30 synthetic oil.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.