What oil does 23 wrx take?
The 2023 Subaru WRX, equipped with the FA24 2.4-liter turbo engine, uses synthetic SAE 5W-30 engine oil, and its oil capacity is about 5.1 quarts with a filter.
In more detail, the WRX requires a full-synthetic 5W-30 oil that meets current API standards (SN or newer) and ILSAC GF-6 compatibility. Always verify the exact specification in the owner's manual or with a Subaru dealer, as climate and driving conditions can influence oil selection and service intervals.
Oil specification
Engine and oil grade
The FA24 engine in the 2023 WRX is designed for a high-performance, turbocharged setup, which benefits from a high-quality synthetic oil. The recommended grade is SAE 5W-30, and the oil should meet API SN or newer standards along with ILSAC GF-6 compatibility to ensure proper protection and fuel efficiency.
Before the list that follows, note these key points about the oil for the 2023 WRX.
- Viscosity: 5W-30
- Oil type: Synthetic engine oil
- Standards: API SN or newer; ILSAC GF-6 compatibility
- Capacity: Approximately 5.1 quarts (with filter)
Choosing the right oil helps protect the turbocharged FA24 engine under boost and high-temperature operation, and using a quality synthetic that meets the above standards is widely recommended by manufacturers and specialists.
Maintenance and intervals
Oil change intervals for the WRX depend on driving conditions and climate. As a rule of thumb, Subaru typically cites a normal-service interval in the vicinity of several thousand miles, with more frequent changes under severe driving conditions. Always follow the specific schedule in your owner's manual or advised by your dealer, especially if the car is driven aggressively or in extreme heat or cold.
Summary
For the 2023 Subaru WRX, use synthetic 5W-30 motor oil, with a capacity of about 5.1 quarts including the filter. Ensure the oil meets API SN or newer and ILSAC GF-6 standards, and follow the manual's service interval for oil changes. When in doubt, consult your local Subaru dealer or the official owner's manual for climate-specific guidance.
How much oil does a 2.0 wrx take?
Engine Oil
Capacity: 5.4 quarts (with filter).
Is it okay to put 5W-30 instead of 0W-20?
It is not recommended to use 5W-30 instead of the recommended 0W-20, as the thicker oil can cause premature engine wear by not reaching all parts and potentially void your warranty. While some engines can handle the switch, especially in hot climates or for older vehicles, using the wrong viscosity can negatively impact fuel efficiency and lead to issues with modern engine components like variable valve timing. Always check your owner's manual for the correct oil specification, and in an emergency, use the correct oil at your next oil change.
Risks of using 5W-30 instead of 0W-20
- Engine wear: The main risk is that the thicker 5W-30 oil may not flow through the very tight tolerances in a modern engine as well as 0W-20, potentially leading to premature wear or failure.
- Component issues: Modern engines are designed for precise oil flow, and using a thicker oil can interfere with components like the variable valve timing system.
- Warranty issues: Using an oil that is not specified by the manufacturer can void your engine's warranty if an issue arises.
- Reduced fuel economy: 0W-20 oil is specified to improve fuel efficiency, and using a thicker oil will reduce that benefit.
When it might be acceptable
- Emergency situations: In an emergency where you can't find 0W-20, using 5W-30 is a short-term solution, but you should switch to the correct oil at your next oil change.
- Hot climates or hard use: Some experts suggest that in very hot climates or for heavy-duty use like towing, a thicker oil like 5W-30 might provide better protection, as the same engine models sometimes recommend 5W-30 in different regions of the world.
Best practice
- Consult your owner's manual: Always use the oil viscosity specified in your car's owner's manual for the best performance and protection.
- Change to the correct oil: If you've used the wrong oil, change it to the correct 0W-20 at the next opportunity.
How much oil does a 3.0 V6 take?
A 3.0L V6 engine typically takes between 4.5 and 6.5 quarts of oil, but the exact amount depends on the specific vehicle make and model. For example, a 2006 Ford Fusion 3.0L V6 requires 6 quarts, while a 2001 Jaguar S-Type 3.0L V6 needs 6.5 quarts. Always check your vehicle's owner's manual for the precise capacity and oil viscosity requirements.
| Vehicle | Oil Capacity |
|---|---|
| 2012 Ford Escape 3.0L V6 | 6 quarts |
| 2006 Ford Fusion 3.0L V6 | 6 quarts |
| 2003 Ford Ranger 3.0L V6 | 4.5 quarts |
| 2001 Jaguar S-Type 3.0L V6 | 6.5 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_W94laeukDsOI9u8P18jauQM_148';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
What oil does Subaru recommend in a WRX?
2015–2021 Subaru WRX
Models from 2015 to 2021 continue to utilize the 2.0L turbocharged FA20DIT engine. Subaru specifies 5W-30 full synthetic motor oil for these vehicles. This oil type offers a balance between performance and protection, suitable for various driving conditions.
